- internal extension for connecting two tubes with the same diameter flush to one another - as it is less resilient than the tube connector 149, the tube connector 150 may only be used with tubes with a wall thickness of 3.25 mm - e.g. for constructing shelves or coat rails For a tube outer diameter of 48.3 mm Weight: approx. 0.49 kg Allen key required: 5/16’
- for attaching pipes, e.g. to walls - large boreholes ensure mechanical or chemical anchoring Attention! To obtain sufficient stability, you should not build a construction exclusively with articulated connectors! For a pipe outer diameter of 48.3 mm Measure ‘B’: 99 mm Measure ‘C’: 153 mm Measure ‘D’: 113 mm Measure ‘E’: 96 mm Weight: approx. 1.35 kg Allen key required: 5/16’
- T-connector can be tilted at an angle of 0 - 11 degrees - often used for struts - no division of the continuous pipe possible For a pipe outer diameter of 48.3 mm Measure ‘A’: 68 mm Weight: approx. 0.77 kg Required Allen key: 5/16’
- Elbow with 0 to 11 degree angle of inclination per outlet - Used for example for stair railings For a pipe outer diameter of 48.3 mm Measure ‘A’: 68 mm Weight: approx. 1.04 kg Required Allen key: 5/16’
- T-connector with an angle of inclination of 0 - 11 degrees - often used for struts - allows the continuous pipe to be split - alternatively, pipe connector 153 can be used For a tube outer diameter of 48.3 mm Measure ‘A’: 68 mm Measure ‘B’: 168 mm Weight: approx. 1.33 kg Allen key required: 5/16’
- single-pass cross connector with two outlets where the continuous pipe can be adjusted at an angle of 0 to 11 degrees - often used in conjunction with pipe connectors 153 or 155 - the continuous pipe cannot be divided For a tube with an external diameter of 48.3 mm Dimension ‘A’: 158 mm Weight: approx. 0.98 kg Allen key required: 5/16’
- cross connector with 4 outlets and one passage for a 90° connection to a vertical post - for constructions with several posts, e.g. play structures - the division of the continuous tube is not possible For an external pipe diameter of 48.3 mm Measure ‘A’: 68 mm Weight: approx. 1.33 kg Allen key required: 5/16’
- open cross connector with two openings for connecting two pipes at a 90° angle - suitable for extensions and conversions of existing structures - no division of the continuous pipes possible - alternatively, pipe connector 161 can be used For a pipe external diameter of 48.3 mm Measure ‘A’: 49.5 mm Weight: approx. 0.59 kg Allen key required: 5/16’
- Two-way cross connector for connecting two pipes at a 90° angle - No division of the continuous pipes possible - Often used for railing constructions, for example - Alternatively, pipe connector 160 can be used For a pipe outer diameter of 48.3 mm Measure ‘A’: 51 mm Measure ‘B’: 55 mm Weight: approx. 0.55 kg Allen key required: 5/16’
- Connector combining a T-connector and cross-connector with two passages and one outlet - No division of the continuous tubes possible - Used for shelf constructions, for example For a tube external diameter of 48.3 mm Measure ‘A’: 68 mm Measure ‘B’: 55 mm Weight: approx. 0.83 kg Allen key required: 5/16’
- zwei mal um 180° verstellbarer Gelenkverbinder mit zwei Abgängen und einem Durchgang - setzt sich aus 2 x 173F und 1 x 167M zusammen die miteinander vernietet sind um maximale Stabilität zu gewährleisten - keine Stückelung des durchlaufenden Rohrs möglich Achtung! Um genügend Stabilität zu erhalten, sollte man eine Konstruktion nicht ausschließlich mit diesen Gelenkverbindern aufbauen! Für einen Rohraußendurchmesser von 48,3 mm Maß "A": 259 mm Gewicht: ca. 1,66 kg Benötigter Inbusschlüssel: 5/16"
- Pivot eye that can be used with the 173F pipe connector as part of the 167 pipe connector or for attaching wooden or plastic plates, for example - No division of the continuous pipe possible Attention! To achieve sufficient stability, you should not build a construction exclusively with swivel joints! For a pipe with an external diameter of 48.3 mm Dimension ‘B’: 105 mm Hole diameter: 10 mm Material thickness: 8 mm Weight: approx. 0.49 kg Allen key required: 5/16’
- 90° corner swivel joint, can be adjusted twice by 180°, with two outlets and one passage - consists of 2 x 173F and 1 x 168M, riveted together for maximum stability - no division of the continuous pipe possible Attention! To achieve sufficient stability, you should not build a construction exclusively with hinged connectors! For an outer pipe diameter of 48.3 mm Dimension ‘A’: 130 mm Weight: approx. 1.65 kg Required Allen key: 5/16’
- Joint eye at a 90° angle that can be used with the 173F pipe connector as part of the 168 pipe connector or for attaching wooden or plastic plates, for example - No division of the continuous pipe possible Attention! To achieve sufficient stability, you should not build a construction exclusively with articulated joints! For a pipe with an external diameter of 48.3 mm Dimension ‘A’: 53 mm Weight: approx. 0.47 kg Allen key required: 5/16’
- swivel foot for attaching pipes to walls, for example - consists of the 169M and 173F pipe connectors, which are riveted together to ensure maximum stability - large holes ensure mechanical or chemical anchoring Attention! To obtain sufficient stability, you should not build a construction exclusively with swivel connectors! For a tube outer diameter of 48.3 mm Measure ‘A’: 77 mm Measure ‘B’: 112 mm Measure ‘C’: 85 mm Measure ‘D’: 109 mm Weight: approx. 0.96 kg Allen key required: 5/16’
- pipe connector for mounting a grid on one side of a pipe - can also be used to mount other building materials - pipe connector 171 is suitable for mounting a grid on both sides of a pipe - it is not possible to divide the continuous pipe - this pipe connector is made of steel (not malleable cast iron) For a tube with an external diameter of 48.3 mm Dimension ‘A’: 62-72 mm Dimension ‘B’: 34-44 mm Weight: approx. 0.08 kg
- pipe connector for mounting a mesh on two sides of a pipe - can also be used to mount other building materials - pipe connector 170 is suitable for mounting a mesh on one side of a pipe - it is not possible to divide the continuous pipe - this pipe connector is made of steel (not malleable cast iron) For a pipe with an external diameter of 48.3 mm Measure ‘A’: 62-72 mm Measure ‘B’: 34-44 mm Weight: approx. 0.11 kg
- simple joint piece, adjustable through 180°, with one inlet and one outlet - consists of the 173M and 173F pipe connectors, which are riveted together to ensure maximum stability - no division of the continuous pipe possible Attention! To achieve sufficient stability, a construction should not be built exclusively with articulated connectors! For a tube outer diameter of 48.3 mm Measure ‘A’: 77 mm Measure ‘B’: 130 mm Weight: approx. 0.89 kg
- Joint holder that can be connected to various tube connectors (hinge eyes) (167M, 168M, 169M, 173M) - for flexible tube constructions Attention! To achieve sufficient stability, a construction should not be built exclusively with joint connectors! Hole size of the strap 11 mm For a pipe with an external diameter of 48.3 mm Dimension ‘A’: 77 mm Weight: approx. 0.54 kg
- swivel eye is part of the 173 pipe connector and can be used, for example, to attach wooden or plastic plates - no division of the continuous pipe possible Attention! To achieve sufficient stability, you should not build a construction exclusively with swivel joints! Hole size of the strap 11 mm For a pipe with an external diameter of 48.3 mm Measure ‘B’: 53 mm Weight: approx. 0.40 kg
- Pipe connector with one inlet and three outlets, each at a 90° angle to the through-going pipe - Often used in the construction of shelves - No division of the through-going pipe possible For a pipe outer diameter of 48.3 mm Measure ‘A’: 68 mm Measure ‘B’: 136 mm Weight: approx. 0.98 kg
- locking ring for securing non-fixed pipe connectors such as door hinges ( 138 / 140 ) and as an additional vertical support - no division of the continuous pipe possible For a pipe outer diameter of 48.3 mm Dimension ‘A’: 25 mm Weight: approx. 0.17 kg
for a pipe outer diameter of 48.3 mm Measure ‘A’ = 41 mm Measure ‘B’ = 25 mm Weight: approx. 0.22 kg Allen key required: 5/16’
for an external pipe diameter of 48.3 mm Measure ‘A’ = 104 mm Measure ‘B’ = 140 mm Weight: approx. 0.47 kg Allen key required: 5/16’