Suitable for 90° T-joints between a horizontal and a vertical tube No division of the continuous pipe possible e.g. for horizontal and vertical handrail supports for an external pipe diameter of 26.9 mm Dimension ‘A’: 41 mm Weight: approx. 0.19 kg Allen key required: 1/4’  

for creating 90° T-joints, e.g. two horizontal and one vertical tube This type of connector allows the continuous tube to be split for use in railings, for example For a tube external diameter of 26.9 mm Measure ‘A’: 41 mm Measure ‘B’: 82 mm Weight: approx. 0.36 kg Allen key required: 1/4

90° corner connector for connecting two horizontal pipes to a vertical pipe, for example often combined with pipe connector 128 no division of the continuous pipe possible e.g. for shelves, railings or other right-angled constructions for a pipe external diameter of 26.9 mm Measure ‘A’: 41 mm Weight: approx. 0.28 kg Required Allen key: 1/4’

for 90° cross-connection of e.g. two horizontal and one vertical tube no division of the continuous tube possible often combined with tube connectors 101 or 104 e.g. for connecting the support and the centre element of railings for a tube outer diameter of 26.9 mm Measure ‘B’: 82 mm Weight: approx. 0.26 kg Allen key required: 1/4

for connecting two tubes at a 90° angle can be used as a handrail end piece, for example for an external tube diameter of 26.9 mm Dimension ‘A’: 41 mm Weight: approx. 0.25 kg Allen key required: 1/4’  

90° corner connector for two horizontal and one vertical tube for handrails or other rectangular connections often used for knee rails in combination with connector 116 for an external pipe diameter of 26.9 mm Dimension ‘A’: 41 mm Weight: approx. 0.37 kg Allen key required: 1/4’  

Tube connector for rigid mounting of tubes to walls not suitable for floor mounting of railings, for example, use tube connector 132 for this purpose for an external tube diameter of 26.9 mm measure ‘B’: 42 mm measure ‘C’: 83 mm measure ‘D’: 59 mm Diameter of the hole: 7 mm Weight: approx. 0.39 kg Allen key required: 1/4’

Tube connector for secure attachment of handrails to the floor, for example The tall shaft and two screws give the tube connector great stability The tube connector is to be attached with mechanical or chemical anchoring through large holes For an external tube diameter of 26.9 mm Measure ‘A’: 76 mm Measure ‘C’: 114 mm Measure ‘D’: 76 mm Measure ‘E’: 60 mm Weight: approx. 0.52 kg Allen key required: 1/4’

Plastic plug for sealing and protecting open pipes Can also be used as an alternative to aluminium end cap 333 For a pipe outer diameter of 26.9 mm Colour: black Weight: approx. 0.004 kg

- open 90° T-connector - can be used to extend or modify existing constructions where the 101 pipe connector cannot be used - no division of the continuous pipe possible - similar to the 136 pipe connector for a pipe outer diameter of 26.9 mm Dimension ‘A’: 51 mm Weight: approx. 0.29 kg Allen key required: 1/4’

- can be used in conjunction with pipe connector 140 for constructing door fastenings or door and gate hinges - No division of the continuous tube possible For an external tube diameter of 26.9 mm Measure ‘A’: 30 mm Measure ‘B’: 25.5 mm Diameter of the eye: 14 mm Weight: approx. 0.17 kg Required Allen key: 1/4’  

- can be used in conjunction with pipe connector 138 for constructing door fastenings or door and gate hinges - no division of the continuous tube possible for an external tube diameter of 26.9 mm Measure ‘A’: 30 mm Measure ‘B’: 25.5 mm Measure ‘C’: 38 mm Measure ‘D’: 12 mm Weight: approx. 0.23 kg Required Allen key: 1/4’

- for mounting items such as handrails, banisters or advertising signs on walls - no division of the continuous pipe possible for an external pipe diameter of 26.9 mm Measure ‘A’: 54 mm Measure ‘B’: 77 mm Measure ‘C’: 57 mm Measure ‘D’: 44 mm Measure ‘E’: 7 mm Weight: approx. 0.30 kg Allen key required: 1/4’

- a pipe connector that can be adjusted in the usual pairwise application in an angle of 90 to 180 degrees (two pipe connectors can be seen in the photo) - it is not possible to divide the continuous pipe for an external pipe diameter of 26.9 mm Measure ‘A’: 53 mm Weight: approx. 0.20 kg Allen key required: 1/4’

Extension piece for connecting two pipes with the same diameter - is attached to the outside of the pipes - for a pipe outer diameter of 26.9 mm - Dimension ‘A’: 76 mm - Weight: approx. 0.25 kg - Required Allen key: 1/4’

Cross connector with four outlets and one passage for a 90° connection to a vertical post - for constructions with multiple posts, e.g. play structures - the continuous tube cannot be divided for an external tube diameter of 26.9 mm Measure ‘A’: 41 mm Weight: approx. 0.47 kg Allen key required: 1/4’

- open cross connector with two openings for connecting two pipes at a 90° angle - Suitable for extensions to and conversions of existing structures - No division of the continuous pipes possible - Alternatively, pipe connector 161 can be used for an external pipe diameter of 26.9 mm Measure ‘A’: 28 mm Weight: approx. 0.17 kg Allen key required: 1/4’

- two-way cross connector for connecting two tubes at a 90° angle - no division of the continuous tubes possible - often used for railing constructions, for example - alternatively, tube connector 160 can be used for an external tube diameter of 26.9 mm Measure ‘A’: 31.5 mm Measure ‘B’: 38 mm Weight: approx. 0.22 kg Allen key required: 1/4’

- two 180° adjustable joint connectors with two outlets and one passage - consists of 2 x 173F and 1 x 167M, riveted together for maximum stability - no division of the continuous pipe possible Attention! To obtain sufficient stability, you should not build a construction exclusively with these articulated connectors! for a pipe outer diameter of 26.9 mm Dimension ‘A’: 202 mm Weight: approx. 0.77 kg  

- Pivot eye that can be used with the 173F pipe connector as part of the 167 pipe connector or for attaching wooden or plastic plates, for example - No division of the continuous pipe possible Attention! To achieve sufficient stability, you should not build a construction exclusively with swivel joints! for a pipe outer diameter of 26.9 mm Dimension ‘B’: 80 mm Hole diameter: 10 mm Material thickness: 8 mm Weight: approx. 0.30 kg Allen key required: 1/4’  

90° corner joint connector, can be adjusted two times by 180°, with two outlets and one passage - consists of 2 x 173F and 1 x 168M, which are riveted together to ensure maximum stability - no division of the continuous pipe possible Attention! To achieve sufficient stability, you should not build a construction exclusively with hinged connectors! for a pipe outer diameter of 26.9 mm Dimension ‘A’: 101 mm Weight: approx. 0.84 kg Required Allen key: 1/4’  

- Joint lug that can be used at a 90° angle with the 173F tube connector as part of the 168 tube connector or for attaching wooden or plastic plates, for example - no division of the continuous pipe possible Attention! To obtain sufficient stability, you should not build a construction exclusively with swivel couplings! for a pipe outer diameter of 26.9 mm Dimension ‘A’: 40 mm Weight: approx. 0.30 kg Required Allen key: 1/4’

- consists of the 169M and 173F tube connectors, which are riveted together to ensure maximum stability - large boreholes ensure mechanical or chemical anchoring Attention! To obtain sufficient stability, you should not build a construction exclusively with joint connectors! for a tube outer diameter of 26.9 mm Measure ‘A’: 61 mm Measure ‘B’: 112 mm Measure ‘C’: 85 mm Measure ‘D’: 93 mm Weight: approx. 0.66 kg Allen key required: 1/4’  

- swivel foot bracket used with the 173F tube connector as part of the 169 tube connector - large holes ensure mechanical or chemical anchoring Attention! To obtain sufficient stability, you should not build a construction exclusively with swivel joints! Measure ‘B’: 112 mm Measure ‘C’: 85 mm Measure ‘D’: 32 mm Weight: approx. 0.38 kg