Suitable for 90° T-joints between a horizontal and a vertical pipe No division of the continuous pipe possible e.g. for horizontal and vertical handrail supports For a pipe outer diameter of 60.3 mm Dimension ‘A’: 84 mm Weight: approx. 0.85 kg Allen key required: 5/16’

for creating 90° T-joints, e.g. two horizontal and one vertical tube the division of the continuous tube is possible with this type e.g. for railing construction For a tube outer diameter of 60.3 mm Measure ‘A’: 84 mm Measure ‘B’: 168 mm Weight: approx. 1.71 kg Allen key required: 5/16’

90° corner connector for connecting two horizontal tubes to a vertical tube, for example often used with tube connector 128 it is not possible to divide the continuous tube for use in shelving, railings or other right-angled constructions, for example For a tube outer diameter of 60.3 mm Dimension ‘A’: 84 mm Weight: approx. 1.30 kg Allen key required: 5/16’

for connecting two horizontal tubes and one vertical tube at a 90° angle, for example the tube running through it is not possible to divide often used in combination with tube connectors 101 or 104 for connecting the post and the centre element of a banister, for example For a tube outer diameter of 60.3 mm Measure ‘B’: 168 mm Weight: approx. 1.20 kg Allen key required: 5/16’

for connecting two tubes at a 90° angle can be used as a handrail end piece, for example For a tube outer diameter of 60.3 mm Dimension ‘A’: 84 mm Weight: approx. 1.23 kg Allen key required: 5/16’

90° corner connector for two horizontal and one vertical tube for handrails or other rectangular connections often used for knee rails in combination with tube connector 116 For an external tube diameter of 60.3 mm Measure ‘A’: 84 mm Weight: approx. 1.80 kg Allen key required: 5/16’

Tube connector for rigid mounting of tubes on walls not suitable for floor mounting of e.g. railings, use tube connector 132 for this purpose For a pipe outer diameter of 60.3 mm Measure ‘B’: 64 mm Measure ‘C’: 128 mm Measure ‘D’: 97 mm Diameter of the hole: 7 mm Weight: approx. 1.23 kg Required Allen key: 5/16’

Tube connector for secure fastening of, for example, handrails to the floor The tall shaft and two screws give the tube connector great stability The tube connector is to be fastened with mechanical or chemical anchoring through large holes For a pipe outer diameter of 60.3 mm Measure ‘A’: 127 mm Measure ‘C’: 165 mm Measure ‘D’: 127 mm Measure ‘E’: 102 mm Weight: approx. 1.83 kg Required Allen key: 5/16’

Plastic plug for sealing and protecting open pipes - Can also be used as an alternative to aluminium end cap 333 - For a pipe outer diameter of 60.3 mm - Colour: black - Weight: approx. 0.02 kg

- open 90° T-connector - can be used to extend or modify existing constructions where the 101 pipe connector cannot be used - no division of the continuous pipe possible - similar to the 136 pipe connector For a pipe outer diameter of 60.3 mm Measure ‘A’: 91 mm Weight: approx. 1.01 kg Allen key required: 5/16

- a pipe connector that can be adjusted in the usual paired use in an angle of 90 to 180 degrees (two pipe connectors can be seen in the photo) - no division of the continuous pipe possible For a pipe with an external diameter of 60.3 mm Measure ‘A’: 110 mm Weight: approx. 0.97 kg Allen key required: 5/16’

- Extension piece for connecting two tubes with the same diameter - Is attached to the outside of the tubes - Alternatively, the tube connector 150 can be used For an external pipe diameter of 60.3 mm Measure ‘A’: 120 mm Weight: approx. 0.96 kg Allen key required: 5/16’

- open cross connector with two openings for connecting two pipes at a 90° angle - suitable for extensions to and conversions of existing structures - no division of the continuous pipes possible - alternatively, pipe connector 161 can be used For a pipe external diameter of 60.3 mm Measure ‘A’: 61 mm Weight: approx. 0.87 kg Allen key required: 5/16’

- two-way cross connector for connecting two tubes at a 90° angle - no division of the continuous tubes possible - often used for railing constructions, for example - alternatively, tube connector 160 can be used For a pipe outer diameter of 60.3 mm Measure ‘A’: 61 mm Measure ‘B’: 67 mm Weight: approx. 0.93 kg Allen key required: 5/16’

- two 180° adjustable joint connectors with two outlets and one inlet - consists of 2 x 173F and 1 x 167M, riveted together for maximum stability - no division of the continuous pipe possible Attention! To achieve sufficient stability, you should not build a construction exclusively with these articulated connectors! For a pipe outer diameter of 60.3 mm Measure ‘A’: 300 mm Weight: approx. 2.40 kg Required Allen key: 5/16’

- Pivot eye that can be used with the 173F pipe connector as part of the 167 pipe connector or for attaching wooden or plastic plates, for example - No division of the continuous pipe possible Attention! To achieve sufficient stability, you should not build a construction exclusively with swivel joints! For a pipe with an external diameter of 60.3 mm Dimension ‘B’: 124 mm Hole diameter: 10 mm Material thickness: 9 mm Weight: approx. 0.64 kg Allen key required: 5/16’

- 90° corner joint connector, can be adjusted two times by 180°, with two outlets and one passage - consists of 2 x 173F and 1 x 168M, which are riveted together to ensure maximum stability - no division of the continuous pipe possible Attention! To obtain sufficient stability, you should not build a construction exclusively with hinged connectors! For an outer pipe diameter of 60.3 mm Dimension ‘A’: 149 mm Weight: approx. 2.32 kg Required Allen key: 5/16’

- Joint eye at a 90° angle that can be used with the 173F pipe connector as part of the 168 pipe connector or for attaching wooden or plastic plates, for example - No division of the continuous pipe possible Attention! To achieve sufficient stability, you should not build a construction exclusively with articulated joints! For a pipe with an external diameter of 60.3 mm Measure ‘A’: 62 mm Weight: approx. 0.62 kg Allen key required: 5/16’

- swivel foot for attaching pipes, e.g. to walls - consists of the pipe connectors 169M and 173F, which are riveted together to ensure maximum stability - large holes ensure mechanical or chemical anchoring Attention! To obtain sufficient stability, you should not build a construction exclusively with swivel connectors! For a tube outer diameter of 60.3 mm Measure ‘A’: 89 mm Measure ‘B’: 112 mm Measure ‘C’: 85 mm Measure ‘D’: 121 mm Weight: approx. 1.23 kg Allen key required: 5/16’

- pipe connector for mounting a grid on one side of a pipe - can also be used to mount other building materials - pipe connector 171 is suitable for mounting a grid on both sides of a pipe - it is not possible to divide the continuous pipe - this pipe connector is made of steel (not malleable cast iron) - dimension ‘A’: 70-80 mm Measure ‘B’: 45-55 mm Weight: approx. 0.08 kg

- pipe connector for mounting a mesh on two sides of a pipe - can also be used to mount other construction materials - pipe connector 170 is suitable for mounting a mesh on one side of a pipe - it is not possible to divide the continuous pipe - this pipe connector is made of steel (not malleable iron) For a pipe with an external diameter of 60.3 mm Measure ‘A’: 70-80 mm Measure ‘B’: 45-55 mm Weight: approx. 0.13 kg

- simple joint piece, adjustable up to 180°, with one pass and one outlet - consists of the 173M and 173F tube connectors, which are riveted together to ensure maximum stability - no division of the continuous tube possible Attention! To obtain sufficient stability, you should not build a construction exclusively with joint connectors! For a tube outer diameter of 60.3 mm Measure ‘A’: 89 mm Measure ‘B’: 152 mm Weight: approx. 1.38 kg

- Joint holder that can be connected to various tube connectors (hinge eyes) (167M, 168M, 169M, 173M) - for flexible tube constructions Attention! To achieve sufficient stability, you should not build a construction exclusively with joint connectors! Hole size of the strap 11 mm For a pipe with an external diameter of 60.3 mm Dimension ‘A’: 89 mm Weight: approx. 0.84 kg

- the continuous pipe cannot be split Attention! To achieve sufficient stability, you should not build a construction exclusively with swivel couplers! Hole size of the strap 11 mm For a pipe outer diameter of 60.3 mm Dimension ‘B’: 60 mm Weight: approx. 0.52 kg