Rope stand with aluminium base 3-fold with underflight protection Total length of aluminium base: approx. 136 mm The support element is made of aluminium, the pins of stainless steel, material no. 1.4301. Stainless steel cables, which are tensioned on the support elements with the aid of springs and clamping sleeves, effectively prevent pigeons from perching. pigeons are effectively prevented from perching. The distance from support element to support element should not exceed 1 m, the maximum rope length per spring should be 3 metres, otherwise the rope will sag too much over time.
basic wire bracket for guttersProduct No. W3233 The bracket is made of high-quality stainless steel, grade 1.4301. The bracket will be mountedto the gutter, steel wires will be tighten to clips to deter birds from nesting and roosting.The distance from bracket to bracket should not exceed 1.50 m. Wire length from clip to clipshould not exceed 3 m, tension may get loose if distance is exceeded.
bracket for pipes2-fold for 40-50-mm-pipesProduct No. W3236Made of stainless steel, grade 1.4301, the bracket is made especially for pipes.We carry standard sizes (ø 40-50 mm pipes and ø 60-70 mm pipes), custom sizes per request available.Steel wires are tighten to clips to deter birds from nesting and roosting.The distance from bracket to bracket should not exceed 1.50 m. Wire length from clip to clipshould not exceed 3 m, tension may get loose if distance is exceeded.
with M4 thread ( 30 mm ) pin length 82 mm made of stainless steel 1.4301 incl. 2 nuts and 2 washers
Cable stand support element 2-fold for round gutters Pins made of stainless steel 1.4301 Clamp made of plastic The support element is made of plastic, the pins of stainless steel, material no. 1.4301, and is mounted on gutters (round shape). mounted on gutters (round shape). A distinction is made between 1-row and 2-row support elements. Stainless steel cables, which are tensioned on the support elements with the aid of springs and clamping sleeves, effectively prevent pigeons from perching. The distance from support element to support element should be a maximum of 1 metre, the rope length per spring a maximum of 3 metres, otherwise the rope will sag too much over time.
Cable stand support element, 1 section for gutters round shape Pins made of stainless steel 1.4301 Clamp made of plastic The support element is made of plastic, the pins of stainless steel, material no. 1.4301, and is mounted on gutters (round shape). A distinction is made between 1-row and 2-row support elements. Stainless steel cables, which are tensioned on the support elements with the aid of springs and clamping sleeves, effectively prevent pigeons from perching. The distance from support element to support element should be a maximum of 1 m, the maximum rope length per spring 3 m, as otherwise the rope will sag too much over time.
36 mm breit aus unbehandeltem Edelstahl, 1.4301
460 mm breit aus unbehandeltem Edelstahl, 1.4301
510 mm breit aus unbehandeltem Edelstahl, 1.4301
560 mm breit aus unbehandeltem Edelstahl, 1.4301
60 mm breit aus unbehandeltem Edelstahl, 1.4301
110 mm breit aus unbehandeltem Edelstahl, 1.4301
160 mm breit aus unbehandeltem Edelstahl, 1.4301
210 mm breit aus unbehandeltem Edelstahl, 1.4301
210 mm breit aus unbehandeltem Edelstahl, 1.4301
310 mm breit aus unbehandeltem Edelstahl, 1.4301
360 mm breit aus unbehandeltem Edelstahl, 1.4301
410 mm breit aus unbehandeltem Edelstahl, 1.4301
Support element for round ridge tiles 3-fold, made of stainless steel 1.4301 The support element is made of stainless steel, material no. 1.4301, which is mounted on round ridge tiles and is variably adjustable in width. Stainless steel cables, which are attached to the support element with the aid of springs and The distance from the support element to the support element is adjustable. The distance from support element to support element element should be a maximum of 1 m, the rope length per spring a maximum of 2-3 m, as otherwise the rope will otherwise the rope will sag too much over time.
Pins: length 95 mmTerminal-Strip: max. 20 mm material thicknessMade of stainless steel, grade 1.4301, the bracket is made especially for ledges, railings or beams.Steel wires are tighten to clips to deter birds from nesting and roosting.The distance from bracket to bracket should not exceed 1.50 m. Wire length from clip to clipshould not exceed 3 m, tension may get loose if distance is exceeded.Product No. W3234
Rope stand with aluminium base 2-fold with underflight protection Total length of aluminium base: approx. 76 mm The support element is made of aluminium, the pins of stainless steel, material no. 1.4301. Stainless steel cables, which are tensioned on the support elements with the aid of springs and clamping sleeves, effectively prevent pigeons from perching. pigeons are effectively prevented from perching. The distance from support element to support element should not exceed 1 m, The maximum rope length per spring should be 3 metres, otherwise the rope will sag too much over time.
Rope stand with aluminium base 4-fold with underflight protection Total length of aluminium base: approx. 196 mm The support element is made of aluminium, the pins of stainless steel, material no. 1.4301. Stainless steel cables, which are tensioned on the support elements with the aid of springs and clamping sleeves, effectively prevent pigeons from perching. pigeons are effectively prevented from perching. The distance from support element to support element should not exceed 1 m, the maximum rope length per spring should be 3 metres, otherwise the rope will sag too much over time.