Suitable for 90° T-joints between a horizontal and a vertical pipe No division of the continuous pipe possible e.g. for horizontal and vertical handrail supports For a pipe outer diameter of 48.3 mm Measure ‘A’: 68 mm Weight: approx. 0.61 kg Allen key required: 5/16’

for creating 90° T-joints, e.g. two horizontal and one vertical tube the division of the continuous tube is possible with this type e.g. for railing construction For a tube outer diameter of 48.3 mm Measure ‘A’: 68 mm Measure ‘B’: 135 mm Weight: approx. 1.05 kg Allen key required: 5/16’

90° corner connector for connecting two horizontal pipes to a vertical pipe, for example often used with pipe connector 128 the continuous pipe cannot be divided For a pipe with an external diameter of 48.3 mm Measure ‘A’: 68 mm Weight: approx. 0.78 kg Allen key required: 5/16’

for connecting two horizontal and one vertical pipe at a 90° angle the pipe running through it is not possible to divide often used in combination with pipe connectors 101 or 104 For a pipe external diameter of 48.3 mm Measure ‘B’: 135 mm Weight: approx. 0.77 kg Allen key required: 5/16’

for connecting two tubes at an angle of 15°-60° can be used, for example, as a gentle transition in a handrail For an external tube diameter of 48.3 mm Measure ‘B’: 122 mm Weight: approx. 0.83 kg Allen key required: 5/16’

- for connecting two tubes at a 90° angle - can be used as a handrail end piece, for example For a tube outer diameter of 48.3 mm Weight: approx. 0.74 kg Allen key required: 5/16’

90° corner connector for two horizontal and one vertical tube for handrails or other rectangular connections often used for knee rails in combination with tube connector 116 For an external tube diameter of 48.3 mm Measure ‘A’: 68 mm Weight: approx. 1.03 kg Allen key required: 5/16’

Short T-connector, angle adjustable from 30 to 60 degrees No division of the continuous pipe possible Often used for stair railings, for example For a pipe outer diameter of 48.3 mm Measure ‘B’: 146 mm Weight: approx. 0.90 kg Allen key required: 5/16’

Cross connector with an angle adjustable from 30 to 45 degrees - with one inlet and two outlets - no division of the continuous pipe possible - e.g. for guardrails on sloping terrain For a pipe with an external diameter of 48.3 mm Measure ‘B’: 217 mm Weight: approx. 1.39 kg Allen key required: 5/16’

Tube connector for rigid mounting of tubes on walls not suitable for floor mounting of railings, for example, use tube connector 132 for this purpose For a pipe outer diameter of 48.3 mm Measure ‘B’: 59 mm Measure ‘C’: 114 mm Measure ‘D’: 88.5 mm Diameter of the hole: 7 mm Weight: approx. 0.88 kg Allen key required: 5/16’

Tube connector for secure mounting of, for example, handrails on the floor The tall shaft and two screws give the tube connector great stability The tube connector is to be mounted with mechanical or chemical anchoring through large holes For a pipe outer diameter of 48.3 mm Measure ‘A’: 90 mm Measure ‘C’: 153 mm Measure ‘D’: 114 mm Measure ‘E’: 90 mm Weight: approx. 1.27 kg Allen key required: 5/16’

Plastic plug for sealing and protecting open pipes for an external pipe diameter of 48.3 mm Colour: black Weight: approx. 0.02 kg

- floor clamp for attaching tubes to the floor - the tubes can be attached and removed as required using a screw - the screw can be protected using a plug - used for railings, for example, that are only installed temporarily or replaced due to damage For a pipe outer diameter of 48.3 mm Measure ‘A’: 124.5 mm Measure ‘B’: 135 mm Measure ‘C’: 139 mm Weight: approx. 2.65 kg Allen key required: 5/16’

90° open T-connector - for expanding or converting existing constructions where the 101 connector cannot be used - the pipe cannot be divided - similar to the 136 connector For a pipe outer diameter of 48.3 mm Dimension ‘A’: 76.5 mm Weight: approx. 0.68 kg Allen key required: 5/16’

- 90° T-connector can be opened - can be used to extend or modify existing constructions where the 101 pipe connector cannot be used - no division of the continuous pipe possible - similar to the 135 pipe connector For an external pipe diameter of 48.3 mm Measure ‘A’: 69 mm Weight: approx. 0.77 kg Allen key required: 5/16’

- Can be used in conjunction with pipe connector 140 for constructing door fastenings or door and gate hinges - No division of the continuous pipe possible For a tube with an external diameter of 48.3 mm Measure ‘A’: 41 mm Measure ‘B’: 25 mm Diameter of the eye: 14 mm Weight: approx. 0.25 kg Allen key required: 5/16’

- can be used in conjunction with pipe connector 138 for constructing door fastenings or door and gate hinges - no division of the continuous pipe possible For a tube external diameter of 48.3 mm Measure ‘A’: 41 mm Measure ‘B’: 25 mm Measure ‘C’: 38 mm Measure ‘D’: 12 mm Weight: approx. 0.31 kg Allen key required: 5/16’

- for mounting items such as handrails, banisters or advertising signs on walls - no division of the continuous pipe possible For a pipe with an external diameter of 48.3 mm Measure ‘A’: 70 mm Measure ‘B’: 107 mm Measure ‘C’: 82.5 mm Measure ‘D’: 50 mm Measure ‘E’: 7 mm Weight: approx. 0.61 kg Allen key required: 5/16’

- for mounting handrails on walls or balustrades, for example - alternatively, the pipe connector 145 can be used for a pipe outer diameter of 48.3 mm Measure ‘A’: 120 mm Measure ‘B’: 120 mm Measure ‘C’: 72 mm Measure ‘D’: 89 mm Measure ‘E’: 73 mm Weight: approx. 1.38 kg

For an external pipe diameter of 48.3 mm Measure ‘A’: 119 mm Measure ‘B’: 68 mm Measure ‘C’: 89 mm Measure ‘D’: 73 mm Weight: approx. 1.51 kg Allen key required: 5/16

- for mounting railings on walls or balustrades, for example - the three mounting points provide a strong hold - can be used as an alternative to tube connectors 144 and 145 For an external pipe diameter of 48.3 mm Measure ‘A’: 89 mm Measure ‘B’: 86 mm Measure ‘C’: 79 mm Weight: approx. 0.92 kg Allen key required: 5/16’

- 360° rotatable tube connector for e.g. handrails on ramps with incline - the freely adjustable angle also allows parallel guidance of the tubes - often used in conjunction with tube connectors 101 or 125 For an external pipe diameter of 48.3 mm Measure ‘A’: 30 mm Measure ‘B’: 72.5 mm Measure ‘C’: 48 mm Weight: approx. 0.60 kg Allen key required: 5/16’

- a pipe connector that can be adjusted in the usual paired use in an angle of 90 to 180 degrees (two pipe connectors can be seen in the photo) - no division of the continuous pipe possible For a pipe with an external diameter of 48.3 mm Measure ‘A’: 93 mm Weight: approx. 0.63 kg Allen key required: 5/16’

- Extension piece for connecting two pipes with the same diameter - Is attached to the outside of the pipes - Alternatively, the 150 pipe connector can be used For an external pipe diameter of 48.3 mm Measure ‘A’: 100 mm Weight: approx. 0.59 kg Allen key required: 5/16’