stairs

Steel staircases as a kit

In many areas, such as storage technology, industrial plants and emergency staircases, straight staircases are better suited than spiral staircases. These can be single or multi-flight. The particular advantage of our kit stairs is that they can be adapted to structural conditions with an incline of 35°-55°.

For the experienced DIY enthusiast, our quick-build kit stairs are a cost-effective alternative that can be delivered from stock. With the stair kit, only the components need to be cut to the appropriate length. The cut surfaces should then be covered with zinc paste or zinc spray to protect against corrosion. This system is suitable for holding up to 13 steps.

kit staircase

for a maximum of 13 steps. The staircase can be screwed on with or without a landing.

ladder crossing

For crossing production plants in industry

aluminium staircase

Comfortable access thanks to 60° angle of inclination. For max. 4270 mm floor height

Suitable steps for our kit stairs

For the stringers, choose either wire mesh or perforated metal, as the hole patterns are different.

Grid steps MW 30x30

Suitable steps for our kit stringers

Grid steps MW 30x10

Suitable steps for our kit stringers

perforated plate steps

Suitable perforated plate steps for our kit stringers

How to contact us

We look forward to receiving your enquiry.

As an alternative to our contact form, you can also send us an email to:

info@e-stahl.com

Notes on the contact form

Your name: We need your name so that we can address you.

Your message: Please let us know how we can help you. The more specific your enquiry, the more effectively we can respond to your request.

For price enquiries, we also need your postcode and delivery address for freight calculation.

Contact

Salutation

First name

Last name

Your email address

Phone

Subject

Comment

Privacy

I have acknowledged the and have read and agree to the .

Fields marked with asterisks (*) are required.

180° tube connector for round tube 42.4 mm outer dimension, wall thickness 3.20 mm, black, with steel core

180° pipe connector made of polyamide (PA) 6, reinforced with 30% glass fibre or glass beads. Colour: black Suitable for round tube, 42.4 mm outer dimension (wall thickness 3.20 mm), with steel core Packaging unit: 1 tube connector

€10.64

Angle fitting 45°

This 45° angle fitting is primarily used to connect the stair stringer to the stair landing. The angle fitting is made of steel (material ST37) and is hot-dip galvanised.

€85.68

Angle iron support 2000 mm

Hot-dip galvanised steel angle bracket (material ST37) with pre-punched slotted holes. The angle iron support with its slotted holes is matched to the quick-assembly stair stringers and serves as a support surface for the landing. Length: 2000 mm

€61.22

Filler rod made of steel Ø 10 mm, hot-dip galvanised, length 2000 mm

Filler rod made of steel (material ST37) hot-dip galvanised in a full bath Diameter: 10 mm Length: 2000 mm Cut edges must be cold galvanised using zinc paste/zinc spray.

€23.60

Foot piece for left stair stringer

Solid end piece for wall or floor mounting. These base pieces are used at the bottom as well as at the top of rapid staircases to maximise the stability of the staircase. The base piece is made of steel (material ST37) and is fully hot-dip galvanised.

€57.12

Foot piece for right stair stringer

€57.12

Galvanised handrail tube, length 2000 mm, Ø 42.4 mm

Handrail tube made of steel (material ST37) hot-dip galvanised in a full bath Diameter: 42.4 mm Length: 2000 mm Cut edges must be cold galvanised using zinc paste/zinc spray.

€94.83

Hot-dip galvanised balusters

The E-steel balusters are perfectly matched to the quick-assembly system and can be installed in just a few simple steps. It is firmly clamped to the stair stringer without having to drill new holes. The quick-assembly balusters are made of steel (material ST37) and hot-dip galvanised. The handrail retaining ring is made of stainless steel V2A, material 1.4301 and can accommodate a handrail Ø 42.4 mm. Up to 7 10 mm Ø filler rods can be screwed to the railing post. This ensures maximum safety and flexibility. The individual stair inclination of 35°-55° degrees is fully maintained with this railing. Total height: approx. 1265 mm Clearance between the filler bars: 87 mm

€114.45

Left stair stringer, length 4030 mm for perforated plate steps

Quick-assembly stair stringer made of steel (material ST37) with slotted holes for perforated plate treads. The stair stringer is made of 3 mm steel and is hot-dip galvanised. The 4030 mm long stair stringer is ideal for designing staircase systems. Thanks to the pre-punched oblong holes, this stringer can be used for a staircase inclination angle of 35°-55° and can accommodate a maximum of 13 perforated plate treads. The contractor / staircase installer is responsible for the structural verification of the staircase.

€339.00

Left stringer, length 4030 mm for grating steps

Quick-assembly stair stringer made of steel (material ST37) with slotted holes for grating steps. The stair stringer is made of 3 mm steel and is hot-dip galvanised. The 4030 mm long stair stringer is ideal for designing staircase systems. Thanks to the pre-punched oblong holes, this stringer can be used for a staircase inclination angle of 35°-55° and can accommodate a maximum of 13 grating treads. The contractor / staircase installer is responsible for the structural verification of the staircase.

€339.00