Suitable for 90° T-joints between a horizontal and a vertical pipe No division of the continuous pipe possible e.g. for horizontal and vertical handrail supports For an external pipe diameter of 33.7 mm Dimension ‘A’: 46 mm Weight: approx. 0.32 kg Required Allen key: 1/4’  

for creating 90° T-joints, e.g. two horizontal and one vertical pipe This type of connector allows the continuous tube to be split for use in railings, for example For a tube external diameter of 33.7 mm Measure ‘A’: 46 mm Measure ‘B’: 92 mm Weight: approx. 0.54 kg Allen key required: 1/4’  

90° corner connector for connecting two horizontal pipes to a vertical pipe, for example often used with pipe connector 128 for shelves, railings or other right-angled constructions, for example for a pipe external diameter of 33.7 mm Weight: approx. 0.41 kg

for connecting two horizontal tubes and one vertical tube at a 90° angle, for example the tube that is being passed through cannot be divided often used in combination with tube connectors 101 or 104 for connecting the post and the centre element of a railing, for example for a tube with an external diameter of 33.7 mm Measure ‘B’: 92 mm Weight: approx. 0.41 kg Allen key required: 1/4’  

for connecting two tubes at an angle of 15° - 60° can be used, for example, as a gentle transition in a handrail for an external tube diameter of 33.7 mm Measure ‘B’: 91 mm Weight: approx. 0.41 kg Allen key required: 1/4’

zur 90° Verbindung von zwei Rohren z.B. als Endstück eines Handlaufs verwendbar für einen Rohraußendurchmesser von 33,7 mm Durchmesser des Bohrloches: 14,5 mm Maß "A": 46 mm Gewicht: ca. 0,38 kg Benötigter Inbusschlüssel: 1/4"  

- T-connector with angle adjustable from 30 to 45 degrees - e.g. for use on stair railings, often used with pipe connector 130 as an alternative: pipe connector 129 for an external pipe diameter of 33.7 mm Measure ‘B’: 118 mm Weight: approx. 0.63 kg Allen key required: 1/4’

90° corner connector for two horizontal and one vertical tube for handrails or other rectangular connections often used for knee rails in combination with connector 116 for an external tube diameter of 33.7 mm Dimension ‘A’: 48 mm Weight: approx. 0.52 kg Allen key required: 1/4’

Short T-connector, angle adjustable from 30 to 60 degrees No division of the continuous pipe possible Often used for stair railings, for example For a pipe outer diameter of 33.7 mm Measure ‘B’: 109 mm Weight: approx. 0.52 kg Required Allen key: 1/4’

Cross connector with an angle adjustable from 30 to 45 degrees - with one inlet and two outlets - no division of the continuous pipe possible - e.g. for guard rails on sloping terrain for an external pipe diameter of 33.7 mm Measure ‘B’: 147 mm Weight: approx. 0.63 kg Allen key required: 1/4’

Tube connector for rigid mounting of tubes to walls not suitable for floor mounting of railings, for example, use tube connector 132 for this purpose for an external tube diameter of 33.7 mm measure ‘B’: 48 mm measure ‘C’: 89 mm measure ‘D’: 65 mm Diameter of the hole: 7 mm Weight: approx. 0.49 kg Allen key required: 1/4’

Tube connector for secure fastening of, for example, handrails to the floor The tall shaft and two screws give the tube connector great stability The tube connector is to be fastened with mechanical or chemical anchoring through large holes For an external tube diameter of 33.7 mm Measure ‘A’: 89 mm Measure ‘C’: 127 mm Measure ‘D’: 89 mm Measure ‘E’: 65 mm Weight: approx. 0.77 kg Allen key required: 1/4’

With lamellas (curved sliding surface) For 34 mm outer tube diameter Wall thickness: 1–3 mm Colour: black

- floor clamp for attaching tubes to the floor - the tubes can be attached and removed as required using a screw - the screw can be protected using a plug - used for railings, for example, that are only set up temporarily or replaced due to damage for an outer tube diameter of 33.7 mm Measure ‘A’: 113 mm Measure ‘B’: 122 mm Measure ‘C’: 127 mm Weight: approx. 1.83 kg Allen key required: 1/4’

- open 90° T-connector - can be used to extend or modify existing constructions where the 101 pipe connector cannot be used - no division of the continuous pipe possible - similar to the 136 pipe connector for a pipe outer diameter of 33.7 mm Dimension ‘A’: 52.5 mm Weight: approx. 0.42 kg Allen key required: 1/4’

- can be used in conjunction with pipe connector 140 for constructing door fastenings or door and gate hinges - No division of the continuous tube possible For a tube external diameter of 33.7 mm Dimension ‘A’: 33 mm Dimension ‘B’: 25.5 mm Diameter of the eye: 14 mm Weight: approx. 0.19 kg Required Allen key: 1/4’

- can be used in conjunction with pipe connector 138 for constructing door fastenings or door and gate hinges - no division of the continuous pipe possible for an external pipe diameter of 33.7 mm Measure ‘A’: 33 mm Measure ‘B’: 25.5 mm Measure ‘C’: 38 mm Measure ‘D’: 12 mm Weight: approx. 0.25 kg Required Allen key: 1/4’

- for mounting items such as handrails, banisters or advertising signs on walls - no division of the continuous pipe possible for an external pipe diameter of 33.7 mm Measure ‘A’: 57 mm Measure ‘B’: 80 mm Measure ‘C’: 62 mm Measure ‘D’: 44 mm Measure ‘E’: 7 mm Weight: approx. 0.38 kg Allen key required: 1/4’

- for mounting railings on walls or balustrades, for example - alternatively, the 145 pipe connector can be used for a pipe outer diameter of 33.7 mm Measure ‘A’: 103 mm Measure ‘B’: 95 mm Measure ‘C’: 67 mm Measure ‘D’: 57 mm Measure ‘E’: 45 mm Weight: approx. 0.84 kg Allen key required: 1/4’

for an external pipe diameter of 33.7 mm Measure ‘A’: 102 mm Measure ‘B’: 45 mm Measure ‘C’: 67 mm Measure ‘D’: 57 mm Weight: approx. 0.86 kg Required Allen key: 1/4’

for mounting railings on walls or balustrades, for example - the three mounting points provide a strong hold - can be used as an alternative to the 144 and 145 pipe connectors for a pipe outer diameter of 33.7 mm Dimension ‘A’: 76 mm Dimension ‘B’: 68 mm Measure ‘C’: 63 mm Weight: approx. 0.60 kg Allen key required: 1/4’

- 360° rotatable tube connector for e.g. handrails on ramps with a gradient - the freely adjustable angle also allows for parallel pipe guidance - often used in conjunction with tube connectors 101 or 125 for an external pipe diameter of 33.7 mm Measure ‘A’: 22 mm Measure ‘B’: 60 mm Measure ‘C’: 34 mm Weight: approx. 0.31 kg Required Allen key: 1/4’

- a pipe connector that can be adjusted in the usual pairwise use in an angle of 90 to 180 degrees (two pipe connectors can be seen in the photo) - it is not possible to divide the continuous tube - for an external tube diameter of 33.7 mm Measure ‘A’: 59 mm Weight: approx. 0.29 kg Allen key required: 1/4’

- extension piece for connecting two tubes with the same diameter - is attached to the outside of the tubes - alternatively, the tube connector 150 can be used for a tube outer diameter of 33.7 mm Measure ‘A’: 90 mm Weight: approx. 0.42 kg Required Allen key: 1/4’