- internal tube extension for connecting two tubes flush with the same diameter - as it is less resilient than tube connector 149, tube connector 150 may only be used with tubes with a wall thickness of 3.25 mm - e.g. for constructing shelves or coat rails for a tube outer diameter of 33.7 mm Measure ‘A’: 78 mm Measure ‘B’: 20 mm Weight: approx. 0.25 kg Allen key required: 1/4’

Attention! To achieve sufficient stability, you should not build a construction exclusively with articulated connectors! for a tube outer diameter of 33.7 mm Measure ‘B’: 90 mm Measure ‘C’: 127 mm Measure ‘D’: 89 mm Measure ‘E’: 80 mm Weight: approx. 0.88 kg Required Allen key: 1/4’  

- T-connector can be tilted at an angle of 0 - 11 degrees - often used for struts - no division of the continuous pipe possible for an external pipe diameter of 33.7 mm Measure ‘A’: 46 mm Weight: approx. 0.38 kg Required Allen key: 1/4’

- elbow with 0 to 11 degree angle of inclination per outlet - used for example for stair railings for an external pipe diameter of 33.7 mm Measure ‘A’: 46 mm Weight: approx. 0.42 kg Required Allen key: 1/4’

- T-connector with an angle of inclination of 0 - 11 degrees - often used for struts - allows the continuous pipe to be split - alternatively, pipe connector 153 can be used for a pipe external diameter of 33.7 mm Measure ‘A’: 46 mm Measure ‘B’: 104 mm Weight: approx. 0.59 kg Allen key required: 1/4’

- Single-pass cross connector with two outlets where the continuous pipe can be adjusted at an angle of 0 to 11 degrees - Often used in conjunction with pipe connectors 153 or 155 - The continuous pipe cannot be divided for a pipe outer diameter of 33.7 mm - Dimension ‘A’: 112 mm Weight: approx. 0.50 kg Allen key required: 1/4’

Cross connector with four outlets and one passage for a 90° connection to a vertical post - for constructions with multiple posts, e.g. play structures - the continuous tube cannot be divided for an external tube diameter of 33.7 mm Dimension ‘A’: 46 mm Weight: approx. 0.63 kg Allen key required: 1/4’

- open cross connector with two openings for connecting two pipes at a 90° angle - Suitable for extensions to and conversions of existing structures - No division of the continuous pipes possible - Alternatively, pipe connector 161 can be used for an external pipe diameter of 33.7 mm Measure ‘A’: 34 mm Weight: approx. 0.34 kg Allen key required: 1/4’

- Keuzverbinder mit zwei Durchgängen zur 90° Verbindung von zwei Rohren - keine Stückelung der durchlaufenden Rohre möglich - wird z.B. oft bei Geländerkonstruktionen eingesetzt - alternativ Rohrverbinder 160 nutzbar für einen Rohraußendurchmesser von 33,7 mm Maß "A": 38,5 mm Maß "B": 41 mm Gewicht: ca. 0,33 kg Benötigter Inbusschlüssel: 1/4"  

- Connector combining T-connector and cross-connector with two passages and one exit - no division of the continuous tubes possible - used for shelf constructions, for example for an external tube diameter of 33.7 mm Measure ‘A’: 46 mm Measure ‘B’: 40 mm Weight: approx. 0.45 kg Allen key required: 1/4’

- two 180° adjustable joint connectors with two outlets and one passage - consists of 2 x 173F and 1 x 167M, riveted together for maximum stability - no division of the continuous pipe possible Attention! To obtain sufficient stability, you should not build a construction exclusively with these articulated connectors! for a pipe outer diameter of 33.7 mm Dimension ‘A’: 208 mm Weight: approx. 1.06 kg Required Allen key: 1/4’

- Pivot eye that can be used with the 173F pipe connector as part of the 167 pipe connector or for attaching wooden or plastic plates, for example - No division of the continuous pipe possible Attention! To obtain sufficient stability, you should not build a construction exclusively with articulated joints! for a pipe with an external diameter of 33.7 mm Measure ‘B’: 84 mm Hole diameter: 10 mm Material thickness: 8 mm Weight: approx. 0.36 kg Allen key required: 1/4’

- 90° corner swivel joint, can be adjusted two times by 180°, with two outlets and one passage - consists of 2 x 173F and 1 x 168M, which are riveted together to ensure maximum stability - no division of the continuous pipe possible Attention! To obtain sufficient stability, you should not build a construction exclusively with hinged connectors! for a tube outer diameter of 33.7 mm Dimension ‘A’: 104.5 mm Weight: approx. 1.07 kg Required Allen key: 1/4’

- Joint eye at a 90° angle that can be used with the 173F pipe connector as part of the 168 pipe connector or for attaching wooden or plastic plates, for example - No division of the continuous pipe possible Attention! To achieve sufficient stability, you should not build a construction exclusively with articulated joints! for a pipe outer diameter of 33.7 mm Dimension ‘A’: 43.5 mm Weight: approx. 0.34 kg Allen key required: 1/4’

- swivel foot for attaching pipes, e.g. to walls - consists of the pipe connectors 169M and 173F, which are riveted together to ensure maximum stability - large holes ensure mechanical or chemical anchoring Attention! To obtain sufficient stability, you should not build a construction exclusively with swivel connectors! for a tube external diameter of 33.7 mm Measure ‘A’: 61 mm Measure ‘B’: 112 mm Measure ‘C’: 85 mm Measure ‘D’: 93 mm Weight: approx. 0.72 kg Allen key required: 1/4’

- pipe connector for mounting a grid on one side of a pipe - can also be used to mount other building materials - pipe connector 171 is suitable for mounting a grid on both sides of a pipe - it is not possible to divide the continuous pipe - this pipe connector is made of steel (not malleable iron) for a pipe with an external diameter of 33.7 mm Measure ‘A’: 54-64 mm Measure ‘B’: 28-38 mm Weight: approx. 0.08 kg

- pipe connector for mounting a mesh on two sides of a pipe - other construction materials can also be mounted - pipe connector 170 is suitable for mounting a mesh on one side of a pipe - it is not possible to divide the continuous pipe - this pipe connector is made of steel (not malleable iron) for a pipe outer diameter of 33.7 mm Dimension ‘A’: 54-64 mm Dimension ‘B’: 24-38 mm Weight: approx. 0.11 kg

- simple joint piece, adjustable through 180°, with one inlet and one outlet - consists of the 173M and 173F pipe connectors, which are riveted together to ensure maximum stability - no division of the continuous pipe possible Attention! To achieve sufficient stability, a construction should not be built exclusively with joint connectors! for a tube outer diameter of 33.7 mm Measure ‘A’: 61 mm Measure ‘B’: 104.5 mm Weight: approx. 0.61 kg

- Joint holder that can be connected to various tube connectors (hinge eyes) (167M, 168M, 169M, 173M) - for flexible tube constructions Attention! To achieve sufficient stability, you should not build a construction exclusively with joint connectors! Hole size of the bracket 11 mm for a pipe outer diameter of 33.7 mm Dimension ‘A’: 61 mm Weight: approx. 0.33 kg

- swivel eye is part of the 173 tube connector and can be used, for example, to attach wooden or plastic plates - no division of the continuous tube possible Attention! To achieve sufficient stability, you should not build a construction exclusively with swivel joints! Hole size of the strap 11 mm for a pipe outer diameter of 33.7 mm Dimension ‘B’: 43.5 mm Weight: approx. 0.26 kg

- Pipe connector with one inlet and three outlets, each at a 90° angle to the through pipe - Often used in the construction of shelves - No division of the through pipe possible - For an external pipe diameter of 33.7 mm - Dimension ‘A’: 46 mm - Dimension ‘B’: 92 mm - Weight: approx. 0.47 kg

- locking ring for securing non-fixed connectors such as door hinges ( 138/140) and as an additional vertical support - no division of the continuous tube possible for an external tube diameter of 33.7 mm Dimension ‘A’: 25 mm Weight: approx. 0.12 kg

for an external pipe diameter of 33.7 mm Measure ‘A’ = 34 mm Measure ‘B’ = 25 mm Weight: approx. 0.20 kg Allen key required: 1/4’

for an external pipe diameter of 33.7 mm Measure ‘A’ = 86 mm Measure ‘B’ = 120 mm Weight: approx. 0.33 kg Allen key required: 1/4’