Hot-dip galvanised malleable iron pipe couplings
Create stable pipe constructions of the highest quality at a reasonable price. Fast, effective and variable! Most of the pipe connectors are also type-tested by TÜV Rheinland.
Highly cost-effective – few tools – no welding – no special techniques! With a little manual dexterity, you can easily assemble your construction yourself and save on expensive tradesmen. All components are simply screwed together. E-stahl has been selling tube connectors on the European market for many years. Quality is E-stahl's top priority.
Our company has been certified by TÜV Rheinland according to ISO 9001 since 2007. Benefit from our decades of experience as a master workshop. Our product line consists of weldless pipe connectors, made of a proven and resilient malleable iron according to BS EN 1562:1997. The high quality standard during production is the basis for the reliable absorption of high static forces and the guarantee of stable connection nodes with a clean appearance and the best corrosion resistance thanks to the highly durable galvanisation (hot-dip galvanised according to BS EN ISO1461:1999). The reliable frictional connection and pull-off strength is guaranteed by the use of the highest quality self-tapping screws. Our pipe connectors are available in five sizes. The first three digits describe the connector type, the last two digits the pipe size, whereby the decimal place is omitted. For example, the following order number is used for the right-angle bend and a pipe to be used in 48.3 mm (corresponds to 1 1/2 inch trade description): 125-D48
.
pipe connector sizes | Nominal diameter |
|---|
For pipe outside diameter
A273/4"26,9 mmB341"33,7 mmC421 1/4"42,4 mmD481 1/2"48,3 mmE602"60,3 mm
How to contact us
We look forward to receiving your enquiry.As an alternative to our contact form, you can also send us an email to:
Notes on the contact form
Your name: We need your name so that we can address you.
Your message: Please let us know how we can help you. The more specific your enquiry, the more effectively we can respond to your request.
For price enquiries, we also need your postcode and delivery address for freight calculation.
- zwei mal um 180° verstellbarer Gelenkverbinder mit zwei Abgängen und einem Durchgang - setzt sich aus 2 x 173F und 1 x 167M zusammen die miteinander vernietet sind um maximale Stabilität zu gewährleisten - keine Stückelung des durchlaufenden Rohrs möglich Achtung! Um genügend Stabilität zu erhalten, sollte man eine Konstruktion nicht ausschließlich mit diesen Gelenkverbindern aufbauen! Für einen Rohraußendurchmesser von 48,3 mm Maß "A": 259 mm Gewicht: ca. 1,66 kg Benötigter Inbusschlüssel: 5/16"
- two 180° adjustable joint connectors with two outlets and one inlet - consists of 2 x 173F and 1 x 167M, riveted together for maximum stability - no division of the continuous pipe possible Attention! To achieve sufficient stability, you should not build a construction exclusively with these articulated connectors! For a pipe outer diameter of 60.3 mm Measure ‘A’: 300 mm Weight: approx. 2.40 kg Required Allen key: 5/16’
- Pivot eye that can be used with the 173F pipe connector as part of the 167 pipe connector or for attaching wooden or plastic plates, for example - No division of the continuous pipe possible Attention! To achieve sufficient stability, you should not build a construction exclusively with swivel joints! for a pipe outer diameter of 26.9 mm Dimension ‘B’: 80 mm Hole diameter: 10 mm Material thickness: 8 mm Weight: approx. 0.30 kg Allen key required: 1/4’
- Pivot eye that can be used with the 173F pipe connector as part of the 167 pipe connector or for attaching wooden or plastic plates, for example - No division of the continuous pipe possible Attention! To obtain sufficient stability, you should not build a construction exclusively with articulated joints! for a pipe with an external diameter of 33.7 mm Measure ‘B’: 84 mm Hole diameter: 10 mm Material thickness: 8 mm Weight: approx. 0.36 kg Allen key required: 1/4’
- Pivot eye that can be used with the 173F pipe connector as part of the 167 pipe connector or for attaching wooden or plastic plates, for example - No division of the continuous pipe possible Attention! To achieve sufficient stability, you should not build a construction exclusively with swivel joints! For a pipe with an external diameter of 42.4 mm Measure ‘B’: 95 mm Hole diameter: 10 mm Material thickness: 8 mm Weight: approx. 0.42 kg Allen key required: 5/16
- Pivot eye that can be used with the 173F pipe connector as part of the 167 pipe connector or for attaching wooden or plastic plates, for example - No division of the continuous pipe possible Attention! To achieve sufficient stability, you should not build a construction exclusively with swivel joints! For a pipe with an external diameter of 48.3 mm Dimension ‘B’: 105 mm Hole diameter: 10 mm Material thickness: 8 mm Weight: approx. 0.49 kg Allen key required: 5/16’
- Pivot eye that can be used with the 173F pipe connector as part of the 167 pipe connector or for attaching wooden or plastic plates, for example - No division of the continuous pipe possible Attention! To achieve sufficient stability, you should not build a construction exclusively with swivel joints! For a pipe with an external diameter of 60.3 mm Dimension ‘B’: 124 mm Hole diameter: 10 mm Material thickness: 9 mm Weight: approx. 0.64 kg Allen key required: 5/16’
90° corner joint connector, can be adjusted two times by 180°, with two outlets and one passage - consists of 2 x 173F and 1 x 168M, which are riveted together to ensure maximum stability - no division of the continuous pipe possible Attention! To achieve sufficient stability, you should not build a construction exclusively with hinged connectors! for a pipe outer diameter of 26.9 mm Dimension ‘A’: 101 mm Weight: approx. 0.84 kg Required Allen key: 1/4’
- 90° corner swivel joint, can be adjusted two times by 180°, with two outlets and one passage - consists of 2 x 173F and 1 x 168M, which are riveted together to ensure maximum stability - no division of the continuous pipe possible Attention! To obtain sufficient stability, you should not build a construction exclusively with hinged connectors! for a tube outer diameter of 33.7 mm Dimension ‘A’: 104.5 mm Weight: approx. 1.07 kg Required Allen key: 1/4’
- 90° corner joint connector, can be adjusted two times by 180°, with two outlets and one passage - consists of 2 x 173F and 1 x 168M, which are riveted together to ensure maximum stability - no division of the continuous pipe possible Attention! To obtain sufficient stability, you should not build a construction exclusively with hinged connectors! For a pipe outer diameter of 42.4 mm Dimension ‘A’: 117 mm Weight: approx. 1.40 kg Required Allen key: 5/16’
- 90° corner swivel joint, can be adjusted twice by 180°, with two outlets and one passage - consists of 2 x 173F and 1 x 168M, riveted together for maximum stability - no division of the continuous pipe possible Attention! To achieve sufficient stability, you should not build a construction exclusively with hinged connectors! For an outer pipe diameter of 48.3 mm Dimension ‘A’: 130 mm Weight: approx. 1.65 kg Required Allen key: 5/16’
- 90° corner joint connector, can be adjusted two times by 180°, with two outlets and one passage - consists of 2 x 173F and 1 x 168M, which are riveted together to ensure maximum stability - no division of the continuous pipe possible Attention! To obtain sufficient stability, you should not build a construction exclusively with hinged connectors! For an outer pipe diameter of 60.3 mm Dimension ‘A’: 149 mm Weight: approx. 2.32 kg Required Allen key: 5/16’
- Joint lug that can be used at a 90° angle with the 173F tube connector as part of the 168 tube connector or for attaching wooden or plastic plates, for example - no division of the continuous pipe possible Attention! To obtain sufficient stability, you should not build a construction exclusively with swivel couplings! for a pipe outer diameter of 26.9 mm Dimension ‘A’: 40 mm Weight: approx. 0.30 kg Required Allen key: 1/4’
- Joint eye at a 90° angle that can be used with the 173F pipe connector as part of the 168 pipe connector or for attaching wooden or plastic plates, for example - No division of the continuous pipe possible Attention! To achieve sufficient stability, you should not build a construction exclusively with articulated joints! for a pipe outer diameter of 33.7 mm Dimension ‘A’: 43.5 mm Weight: approx. 0.34 kg Allen key required: 1/4’
- Joint eye at a 90° angle that can be used with the 173F pipe connector as part of the 168 pipe connector or for attaching wooden or plastic plates, for example - No division of the continuous pipe possible Attention! To achieve sufficient stability, you should not build a construction exclusively with joint connectors! For a pipe with an external diameter of 42.4 mm Dimension ‘A’: 48 mm Weight: approx. 0.41 kg Allen key required: 5/16’
- Joint eye at a 90° angle that can be used with the 173F pipe connector as part of the 168 pipe connector or for attaching wooden or plastic plates, for example - No division of the continuous pipe possible Attention! To achieve sufficient stability, you should not build a construction exclusively with articulated joints! For a pipe with an external diameter of 48.3 mm Dimension ‘A’: 53 mm Weight: approx. 0.47 kg Allen key required: 5/16’
- Joint eye at a 90° angle that can be used with the 173F pipe connector as part of the 168 pipe connector or for attaching wooden or plastic plates, for example - No division of the continuous pipe possible Attention! To achieve sufficient stability, you should not build a construction exclusively with articulated joints! For a pipe with an external diameter of 60.3 mm Measure ‘A’: 62 mm Weight: approx. 0.62 kg Allen key required: 5/16’
- consists of the 169M and 173F tube connectors, which are riveted together to ensure maximum stability - large boreholes ensure mechanical or chemical anchoring Attention! To obtain sufficient stability, you should not build a construction exclusively with joint connectors! for a tube outer diameter of 26.9 mm Measure ‘A’: 61 mm Measure ‘B’: 112 mm Measure ‘C’: 85 mm Measure ‘D’: 93 mm Weight: approx. 0.66 kg Allen key required: 1/4’
- swivel foot for attaching pipes, e.g. to walls - consists of the pipe connectors 169M and 173F, which are riveted together to ensure maximum stability - large holes ensure mechanical or chemical anchoring Attention! To obtain sufficient stability, you should not build a construction exclusively with swivel connectors! for a tube external diameter of 33.7 mm Measure ‘A’: 61 mm Measure ‘B’: 112 mm Measure ‘C’: 85 mm Measure ‘D’: 93 mm Weight: approx. 0.72 kg Allen key required: 1/4’
- swivel foot for attaching pipes, e.g. to walls - consists of the pipe connectors 169M and 173F, which are riveted together to ensure maximum stability - large holes ensure mechanical anchoring Attention! To achieve sufficient stability, you should not build a construction exclusively with swivel connectors! For a tube with an external diameter of 42.4 mm Measure ‘A’: 69 mm Measure ‘B’: 112 mm Measure ‘C’: 85 mm Measure ‘D’: 98 mm Weight: approx. 0.86 kg Allen key required: 5/16’
- swivel foot for attaching pipes to walls, for example - consists of the 169M and 173F pipe connectors, which are riveted together to ensure maximum stability - large holes ensure mechanical or chemical anchoring Attention! To obtain sufficient stability, you should not build a construction exclusively with swivel connectors! For a tube outer diameter of 48.3 mm Measure ‘A’: 77 mm Measure ‘B’: 112 mm Measure ‘C’: 85 mm Measure ‘D’: 109 mm Weight: approx. 0.96 kg Allen key required: 5/16’
- swivel foot for attaching pipes, e.g. to walls - consists of the pipe connectors 169M and 173F, which are riveted together to ensure maximum stability - large holes ensure mechanical or chemical anchoring Attention! To obtain sufficient stability, you should not build a construction exclusively with swivel connectors! For a tube outer diameter of 60.3 mm Measure ‘A’: 89 mm Measure ‘B’: 112 mm Measure ‘C’: 85 mm Measure ‘D’: 121 mm Weight: approx. 1.23 kg Allen key required: 5/16’
- swivel foot bracket used with the 173F tube connector as part of the 169 tube connector - large holes ensure mechanical or chemical anchoring Attention! To obtain sufficient stability, you should not build a construction exclusively with swivel joints! Measure ‘B’: 112 mm Measure ‘C’: 85 mm Measure ‘D’: 32 mm Weight: approx. 0.38 kg
- pipe connector for mounting a grid on one side of a pipe - can also be used to mount other building materials - pipe connector 171 is suitable for mounting a grid on both sides of a pipe - it is not possible to divide the continuous pipe - this pipe connector is made of steel (not malleable cast iron) for a pipe outer diameter of 26.9 mm Measure ‘A’: 50-64 mm Measure ‘B’: 24-38 mm Weight: approx. 0.06 kg