Length 3462 mm Inner width: 500 mm Outer width: 580 mm Rim height: 43 mm Total height: 200 mm Weight per pair: 141 kg Minimum width of tyres/tracks: 300 mm Load capacity per pair with an axle distance of * 1000 mm: 8500 kg * 1500 mm: 10620 kg * 2000 mm: 14000 kg For a better understanding, the total height, edge height, outer and inner width are shown in the sketch (value A: inner width, value B: outer width, value C: edge height, value D: total height). Optionally, the heavy-duty ramps can be designed with or without an edge; there is no price difference between the two variants. If the rails are designed without a border, the corrugated surface is welded flush with the upper edge of the side profiles during ramp production. Please note that the tyres or chains of the vehicle driving onto the ramp must have a minimum width of 300 mm! The ramp is secured with a chain (see pictures). This is placed on the bracket welded under the ramp and attached to a suitable fastening point on the vehicle. All heavy-duty ramps can be fitted with one of the support heads shown below – either the standard head (designation in the illustration: L), hook head (G), end head with tube (T) or end head with bearing (A).

Length 3962 mm Inner width: 500 mm Outer width: 580 mm Rim height: 43 mm Overall height: 200 mm Weight per pair: 161 kg Minimum width of tyres/chains: 300 mm Load capacity per pair with an axle distance of * 1000 mm: 7080 kg * 1500 mm: 8500 kg * 2000 mm: 10620 kg For a better understanding, the total height, edge height, outer and inner width are shown in the sketch (value A: inner width, value B: outer width, value C: edge height, value D: total height). Optionally, the heavy-duty ramps can be supplied with or without an edge; there is no price difference between the two variants. If the rails are designed without a border, the corrugated surface is welded flush with the upper edge of the side profiles during ramp production. Please note that the tyres or chains of the vehicle driving onto the ramp must have a minimum width of 300 mm! The ramp is secured with a chain (see pictures). This is placed on the bracket welded under the ramp and attached to a suitable fastening point on the vehicle. All heavy-duty ramps can be fitted with one of the support heads shown below – either the standard head (designation in the illustration: L), hook head (G), end head with tube (T) or end head with bearing (A).

Length 4462 mm Inner width: 500 mm Outer width: 580 mm Rim height: 43 mm Overall height: 200 mm Weight per pair: 180 kg Minimum width of tyres/chains: 300 mm Load capacity per pair with an axle distance of * 1000 mm: 6070 kg * 1500 mm: 7080 kg * 2000 mm: 8500 kg For a better understanding, the overall height, edge height, outer and inner width are shown in the sketch (value A: inner width, value B: outer width, value C: edge height, value D: overall height). Optionally, the heavy-duty ramps can be supplied with or without an edge; there is no price difference between the two variants. If the rails are designed without a border, the corrugated surface is welded flush with the upper edge of the side profiles during ramp production. Please note that the tyres or chains of the vehicle driving onto the ramp must have a minimum width of 300 mm! The ramp is secured with a chain (see pictures). This is placed on the bracket welded under the ramp and attached to a suitable fastening point on the vehicle. All heavy-duty ramps can be fitted with one of the support heads shown below – either the standard head (designation in the illustration: L), hook head (G), end head with tube (T) or end head with bearing (A).

Length 2462 mm Inner width: 500 mm Outer width: 580 mm Rim height: 43 mm Overall height: 200 mm Weight per pair: 102 kg Minimum width of tyres/tracks: 300 mm Load capacity per pair with an axle distance of * 1000 mm: 14000 kg * 1500 mm: 14000 kg * 2000 mm: 14000 kg For a better understanding, the total height, edge height, outer and inner width are shown in the sketch (value A: inner width, value B: outer width, value C: edge height, value D: total height). Optionally, the heavy-duty ramps can be designed with or without an edge; there is no price difference between the two variants. If the rails are designed without a border, the corrugated surface is welded flush with the upper edge of the side profiles during ramp production. Please note that the tyres or chains of the vehicle driving onto the ramp must have a minimum width of 300 mm! The ramp is secured with a chain (see pictures). This is placed on the bracket welded under the ramp and attached to a suitable fastening point on the vehicle. All heavy-duty ramps can be fitted with one of the support heads shown below – either the standard head (designation in the illustration: L), hook head (G), end head with tube (T) or end head with bearing (A).

Length 4962 mm Inner width: 500 mm Outer width: 580 mm Rim height: 43 mm Overall height: 200 mm Weight per pair: 183 kg Minimum tyre/track width: 300 mm Load capacity per pair with an axle distance of * 1000 mm: 5310 kg * 1500 mm: 6070 kg * 2000 mm: 7080 kg For a better understanding, the overall height, edge height, outer and inner width are shown in the sketch (value A: inner width, value B: outer width, value C: edge height, value D: overall height). Optionally, the heavy-duty ramps can be supplied with or without an edge; there is no price difference between the two variants. If the rails are designed without a rim, the corrugated surface is welded flush with the upper edge of the side profiles during ramp production. Please note that the tyres or chains of the vehicle driving onto the ramp must have a minimum width of 300 mm! The ramp is secured with a chain (see pictures). This is placed on the bracket welded under the ramp and attached to a suitable fastening point on the vehicle. All heavy-duty ramps can be fitted with one of the support heads shown below – either the standard head (designation in the figure: L), hook head (G), end head with tube (T) or end head with bearing (A).

Length 5462 mm Inner width: 500 mm Outer width: 580 mm Rim height: 43 mm Overall height: 200 mm Weight per pair: 201 kg Minimum width of tyres/tracks: 300 mm Load capacity per pair with an axle distance of * 1000 mm: 4720 kg * 1500 mm: 5310 kg * 2000 mm: 6070 kg For a better understanding, the overall height, edge height, outer and inner width are shown in the sketch (value A: inner width, value B: outer width, value C: edge height, value D: overall height). Optionally, the heavy-duty ramps can be ordered with or without an edge; there is no price difference between the two variants. If the rails are designed without a border, the corrugated surface is welded flush with the upper edge of the side profiles during ramp production. Please note that the tyres or chains of the vehicle driving onto the ramp must have a minimum width of 300 mm! The ramp is secured with a chain (see pictures). This is placed on the bracket welded under the ramp and attached to a suitable fastening point on the vehicle. All heavy-duty ramps can be fitted with one of the support heads shown below – either the standard head (designation in the illustration: L), hook head (G), end head with tube (T) or end head with bearing (A).

Length 2962 mm Inner width: 500 mm Outer width: 580 mm Rim height: 43 mm Overall height: 200 mm Weight per pair: 122 kg Minimum width of tyres/tracks: 300 mm Load capacity per pair with an axle distance of * 1000 mm: 10620 kg * 1500 mm: 14000 kg * 2000 mm: 14000 kg For a better understanding, the total height, edge height, outer and inner width are shown in the sketch (value A: inner width, value B: outer width, value C: edge height, value D: total height). Optionally, the heavy-duty ramps can be supplied with or without an edge; there is no price difference between the two variants. If the rails are designed without a border, the corrugated surface is welded flush with the upper edge of the side profiles during ramp production. Please note that the tyres or chains of the vehicle driving onto the ramp must have a minimum width of 300 mm! The ramp is secured with a chain (see pictures). This is placed on the bracket welded under the ramp and attached to a suitable fastening point on the vehicle. All heavy-duty ramps can be fitted with one of the support heads shown below – either the standard head (designation in the illustration: L), hook head (G), end head with tube (T) or end head with bearing (A).