Length 4500 mm Inner width: 340 mm Outer width: 400 mm Rim height: 41.5 mm Total height: 150 mm Weight per pair: 96 kg Minimum width of tyres/chains: 200 mm Load capacity per pair with an axle distance of * 1000 mm: 2945 kg * 1500 mm: 3435 kg * 2000 mm: 4120 kg For a better understanding, the total height, edge height, outer and inner width are shown in the sketch (value A: inner width, value B: outer width, value C: edge height, value D: total height). Optionally, the heavy-duty ramp can be supplied with or without a lip; there is no price difference between the two variants. If the rails are designed without a lip, the corrugated surface is welded flush with the upper edge of the side profiles during ramp production. Please note that the tyres or chains of the vehicle driving onto the ramp must have a minimum width of 200 mm! The ramp is attached by means of a universal steel bracket (see pictures), which can be hooked between the tail lift and the floor of a trailer. The bracket is attached to a crossbar under the ramp rail, can be moved sideways and is secured against slipping out; if necessary, it can be removed. For all heavy-duty ramps, one of the support heads shown below is available - either the standard head (designation in the figure: L), hook head (G), end head with tube (T) or end head with bearing (A).  

Length 5000 mm Inner width: 340 mm Outer width: 400 mm Rim height: 41.5 mm Total height: 150 mm Weight per pair: 107 kg Minimum width of tyres/chains: 200 mm Load capacity per pair with an axle distance of * 1000 mm: 2575 kg * 1500 mm: 2945 kg * 2000 mm: 3435 kg For a better understanding, the total height, edge height, outer and inner width are shown in the sketch (value A: inner width, value B: outer width, value C: edge height, value D: total height). Optionally, the heavy-duty ramp can be supplied with or without a lip; there is no price difference between the two variants. If the rails are designed without a lip, the corrugated surface is welded flush with the upper edge of the side profiles during ramp production. Please note that the tyres or chains of the vehicle driving onto the ramp must have a minimum width of 200 mm! The ramp is attached by means of a universal steel bracket (see pictures), which can be hooked between the tail lift and the floor of a trailer. The bracket is attached to a crossbar under the ramp rail, can be moved sideways and is secured against slipping out; if necessary, it can be removed. For all heavy-duty ramps, one of the support heads shown below is available - either the standard head (designation in the figure: L), hook head (G), end head with tube (T) or end head with bearing (A).

Length 4000 mm Inner width: 340 mm Outer width: 400 mm Rim height: 41.5 mm Total height: 150 mm Weight per pair: 87 kg Minimum width of tyres/tracks: 200 mm Load capacity per pair with an axle distance of * 1000 mm: 3435 kg * 1500 mm: 4120 kg * 2000 mm: 5150 kg For a better understanding, the overall height, edge height, outer and inner width are shown in the sketch (value A: inner width, value B: outer width, value C: edge height, value D: overall height). Optionally, the heavy-duty ramp can be ordered with or without a rim. The special price for this ramp model is only valid for the version with a rim, and the rimless version is subject to a surcharge. If the rails are designed without a rim, the corrugated surface is welded flush with the upper edge of the side profiles during ramp production. Please note that the tyres or chains of the vehicle driving onto the ramp must have a minimum width of 200 mm! The ramp is attached by means of a universal steel bracket (see pictures), which can be hooked between the tail lift and the floor of a trailer. The bracket is attached to a crossbar under the ramp rail, can be moved sideways and is secured against slipping out; if necessary, it can be removed. For all heavy-duty ramps, one of the support heads shown below is available - either the standard head (designation in the figure: L), hook head (G), end head with tube (T) or end head with bearing (A).

Length 2500 mm Inner width: 340 mm Outer width: 400 mm Edge height: 41.5 mm Total height: 150 mm Weight per pair: 59 kg Minimum width of tyres/chains: 200 mm Load capacity per pair with an axle distance of * 1000 mm: 6870 kg * 1500 mm: 8000 kg * 2000 mm: 8000 kg For a better understanding, the total height, edge height, outer and inner width are shown in the sketch (value A: inner width, value B: outer width, value C: edge height, value D: total height). Optionally, the heavy-duty ramp can be supplied with or without a lip; there is no price difference between the two variants. If the rails are designed without a lip, the corrugated surface is welded flush with the upper edge of the side profiles during ramp production. Please note that the tyres or chains of the vehicle driving onto the ramp must have a minimum width of 200 mm! The ramp is attached by means of a universal steel bracket (see pictures), which can be hooked between the tail lift and the floor of a trailer. The bracket is attached to a crossbar under the ramp rail, can be moved sideways and is secured against slipping out; if necessary, it can be removed. For all heavy-duty ramps, one of the support heads shown below is available - either the standard head (designation in the figure: L), hook head (G), end head with tube (T) or end head with bearing (A).

Length 3500 mm Inner width: 340 mm Outer width: 400 mm Rim height: 41.5 mm Total height: 150 mm Weight per pair: 81 kg Minimum width of tyres/chains: 200 mm Load capacity per pair with an axle distance of * 1000 mm: 4120 kg * 1500 mm: 5150 kg * 2000 mm: 6870 kg For a better understanding, the total height, edge height, outer and inner width are shown in the sketch (value A: inner width, value B: outer width, value C: edge height, value D: total height). Optionally, the heavy-duty ramp can be supplied with or without a lip; there is no price difference between the two variants. If the rails are designed without a lip, the corrugated surface is welded flush with the upper edge of the side profiles during ramp production. Please note that the tyres or chains of the vehicle driving onto the ramp must have a minimum width of 200 mm! The ramp is attached by means of a universal steel bracket (see pictures), which can be hooked between the tail lift and the floor of a trailer. The bracket is attached to a crossbar under the ramp rail, can be moved sideways and is secured against slipping out; if necessary, it can be removed. For all heavy-duty ramps, one of the support heads shown below is available - either the standard head (designation in the figure: L), hook head (G), end head with tube (T) or end head with bearing (A).

Length 3000 mm Inner width: 340 mm Outer width: 400 mm Rim height: 41.5 mm Total height: 150 mm Weight per pair: 70 kg Minimum width of tyres/chains: 200 mm Load capacity per pair with an axle distance of * 1000 mm: 5150 kg * 1500 mm: 6870 kg * 2000 mm: 8000 kg For a better understanding, the total height, edge height, outer and inner width are shown in the sketch (value A: inner width, value B: outer width, value C: edge height, value D: total height). Optionally, the heavy-duty ramp can be supplied with or without a lip; there is no price difference between the two variants. If the rails are designed without a lip, the corrugated surface is welded flush with the upper edge of the side profiles during ramp production. Please note that the tyres or chains of the vehicle driving onto the ramp must have a minimum width of 200 mm! The ramp is attached by means of a universal steel bracket (see pictures), which can be hooked between the tail lift and the floor of a trailer. The bracket is attached to a crossbar under the ramp rail, can be moved sideways and is secured against slipping out; if necessary, it can be removed. For all heavy-duty ramps, one of the support heads shown below is available - either the standard head (designation in the figure: L), hook head (G), end head with tube (T) or end head with bearing (A).