Length 3000 mm Inner width: 400 mm Outer width: 460 mm Rim height: 41 mm Total height: 140 mm Weight per pair: 71 kg Minimum width of tyres/tracks: 200 mm Load capacity per pair with an axle distance of * 1000 mm: 4155 kg * 1500 mm: 5540 kg * 2000 mm: 7000 kg For a better understanding, the total height, edge height, outer and inner width are shown in the sketch (value A: inner width, value B: outer width, value C: edge height, value D: total height). Optionally, the heavy-duty ramp can be supplied with or without a lip; there is no price difference between the two variants. If the rails are designed without a lip, the corrugated surface is welded flush with the upper edge of the side profiles during ramp production. Please note that the tyres or chains of the vehicle driving onto the ramp must have a minimum width of 200 mm! The ramp is attached by means of a universal steel bracket (see pictures), which can be hooked between the tail lift and the floor of a trailer. The bracket is attached to a crossbar under the ramp rail, can be moved sideways and is secured against slipping out; if necessary, it can be removed. For all heavy-duty ramps, one of the support heads shown below is available - either the standard head (designation in the figure: L), hook head (G), end head with tube (T) or end head with bearing (A).

Length 2500 mm Inner width: 400 mm Outer width: 460 mm Rim height: 41 mm Total height: 140 mm Weight per pair: 59 kg Minimum width of tyres/chains: 200 mm Load capacity per pair with an axle distance of * 1000 mm: 5540 kg * 1500 mm: 7000 kg * 2000 mm: 7000 kg For a better understanding, the total height, edge height, outer and inner width are shown in the sketch (value A: inner width, value B: outer width, value C: edge height, value D: total height). Optionally, the heavy-duty ramp can be supplied with or without a lip; there is no price difference between the two variants. If the rails are designed without a lip, the corrugated surface is welded flush with the upper edge of the side profiles during ramp production. Please note that the tyres or chains of the vehicle driving onto the ramp must have a minimum width of 200 mm! The ramp is attached by means of a universal steel bracket (see pictures), which can be hooked between the tail lift and the floor of a trailer. The bracket is attached to a crossbar under the ramp rail, can be moved sideways and is secured against slipping out; if necessary, it can be removed. For all heavy-duty ramps, one of the support heads shown below is available - either the standard head (designation in the figure: L), hook head (G), end head with tube (T) or end head with bearing (A).

Length 5000 mm Inner width: 400 mm Outer width: 460 mm Rim height: 41 mm Total height: 140 mm Weight per pair: 106 kg Minimum width of tyres/tracks: 200 mm Load capacity per pair with an axle distance of * 1000 mm: 2080 kg * 1500 mm: 2375 kg * 2000 mm: 2770 kg For a better understanding, the overall height, edge height, outer and inner width are shown in the sketch (value A: inner width, value B: outer width, value C: edge height, value D: overall height). Optionally, the heavy-duty ramp can be supplied with or without a lip; there is no price difference between the two variants. If the rails are designed without a lip, the corrugated surface is welded flush with the upper edge of the side profiles during ramp production. Please note that the tyres or chains of the vehicle driving onto the ramp must have a minimum width of 200 mm! The ramp is attached by means of a universal steel bracket (see pictures), which can be hooked between the tail lift and the floor of a trailer. The bracket is attached to a crossbar under the ramp rail, can be moved sideways and is secured against slipping out; if necessary, it can be removed. For all heavy-duty ramps, one of the support heads shown below is available - either the standard head (designation in the figure: L), hook head (G), end head with tube (T) or end head with bearing (A).

Length 4500 mm Inner width: 400 mm Outer width: 460 mm Rim height: 41 mm Total height: 140 mm Weight per pair: 96 kg Minimum width of tyres/chains: 200 mm Load capacity per pair with an axle distance of * 1000 mm: 2375 kg * 1500 mm: 2770 kg * 2000 mm: 3325 kg For a better understanding, the total height, edge height, outer and inner width are shown in the sketch (value A: inner width, value B: outer width, value C: edge height, value D: total height). Optionally, the heavy-duty ramp can be supplied with or without a lip; there is no price difference between the two variants. If the rails are designed without a lip, the corrugated surface is welded flush with the upper edge of the side profiles during ramp production. Please note that the tyres or chains of the vehicle driving onto the ramp must have a minimum width of 200 mm! The ramp is attached by means of a universal steel bracket (see pictures), which can be hooked between the tail lift and the floor of a trailer. The bracket is attached to a crossbar under the ramp rail, can be moved sideways and is secured against slipping out; if necessary, it can be removed. For all heavy-duty ramps, one of the support heads shown below is available - either the standard head (designation in the figure: L), hook head (G), end head with tube (T) or end head with bearing (A).

Length 4000 mm Inner width: 400 mm Outer width: 460 mm Rim height: 41 mm Total height: 140 mm Weight per pair: 86 kg Minimum width of tyres/chains: 200 mm Load capacity per pair with an axle distance of * 1000 mm: 2770 kg * 1500 mm: 3325 kg * 2000 mm: 4155 kg For a better understanding, the total height, edge height, outer and inner width are shown in the sketch (value A: inner width, value B: outer width, value C: edge height, value D: total height). Optionally, the heavy-duty ramp can be supplied with or without a lip; there is no price difference between the two variants. If the rails are designed without a lip, the corrugated surface is welded flush with the upper edge of the side profiles during ramp production. Please note that the tyres or chains of the vehicle driving onto the ramp must have a minimum width of 200 mm! The ramp is attached by means of a universal steel bracket (see pictures), which can be hooked between the tail lift and the floor of a trailer. The bracket is attached to a crossbar under the ramp rail, can be moved sideways and is secured against slipping out; if necessary, it can be removed. For all heavy-duty ramps, one of the support heads shown below is available - either the standard head (designation in the figure: L), hook head (G), end head with tube (T) or end head with bearing (A).  

Length 3500 mm Inner width: 400 mm Outer width: 460 mm Rim height: 41 mm Total height: 140 mm Weight per pair: 76 kg Minimum width of tyres/tracks: 200 mm Load capacity per pair with an axle distance of * 1000 mm: 3325 kg * 1500 mm: 4155 kg * 2000 mm: 5540 kg For a better understanding, the overall height, edge height, outer and inner width are shown in the sketch (value A: inner width, value B: outer width, value C: edge height, value D: overall height). Optionally, the heavy-duty ramp can be supplied with or without a lip; there is no price difference between the two variants. If the rails are designed without a lip, the corrugated surface is welded flush with the upper edge of the side profiles during ramp production. Please note that the tyres or chains of the vehicle driving onto the ramp must have a minimum width of 200 mm! The ramp is attached by means of a universal steel bracket (see pictures), which can be hooked between the tail lift and the floor of a trailer. The bracket is attached to a crossbar under the ramp rail, can be moved sideways and is secured against slipping out; if necessary, it can be removed. For all heavy-duty ramps, one of the support heads shown below is available - either the standard head (designation in the figure: L), hook head (G), end head with tube (T) or end head with bearing (A).