Structural Adhesive: Bonds + Seals Power - Colour: grey
€11.69
Available, delivery time: 1-3 days
Product information "Structural Adhesive: Bonds + Seals Power - Colour: grey"
High-strength, elastic hybrid structural adhesive
Contents: 300 ml
Packaging: Cartridge
Chemical composition: Hybrid polymer
Skin formation time (max.): 40 min
Skin formation time min./max.: 30–40 min
Curing rate / conditions: 3 mm/day / 23°C and 50% relative humidity, moisture-curing
Application temperature min./max.: 5 to 40 °C
Temperature resistance min./max.: -40 to +90 °C
Temperature resistance, short-term max.: 150 °C
Temperature resistance, short-term max. / conditions: 150 °C / after 16 hours
Volume change max.: 2 %
Max. volume change / condition: 2% / according to DIN 52451
Short-term resistance to: mineral oils, fuels, animal fats, animal oils, vegetable fats, vegetable oils
Silicone-free: Yes
Solvent-free: Yes
PVC-free: Yes
VOC-free: Yes
Isocyanate-free: Yes
UV resistance: Yes
Applications
For structurally bonded joints subject to dynamic stress, as well as seam and joint sealing in bodywork, vehicle and caravan construction, railway carriage and container construction, metal and plant engineering, air conditioning and ventilation duct construction, the food industry and many more.
Instructions
Surfaces must be clean, dry and free of grease. For pre-treatment, please refer to the optimisation table in the technical data sheet.
Cut off the threaded cap, screw on the nozzle and cut to the desired width. Apply the adhesive using a suitable caulking gun. To benefit from the advantages of thick-film bonding, a minimum adhesive thickness of 3 mm is recommended.
Further information can be found on the manufacturer’s website
Login