Eurospike Uno sheet metal
| Quantity | Unit price |
|---|---|
| To 9 |
€13.76
|
| To 19 |
€12.13
|
| To 49 |
€11.29
|
| To 99 |
€10.84
|
| From 100 |
€9.57
|
Available, delivery time: 1-3 days
Product information "Eurospike Uno sheet metal"
1 row pigeon defence strip made of stainless steel 1.4301
Wire thickness 2.0 mm
Welded on stainless steel strip 20 x 1000 mm
Spike height 110 mm
Made in Germany!
Factory / acceptance test certificate according to DIN EN 10204/3.1 possible
The product
With Uno sheet metal, the spikes are welded to a 1 m long stainless steel strip,
material no. 1.4301 are welded on. The surface is untreated.
The stainless steel strip is 20 mm wide, onto which the spikes (d= 2.0 mm) are
are welded on at 50 mm intervals and cover a landing area of approx.
a width of approx. 50 mm.
Holes punched into the ‘’stainless steel strip allow the strip to be variably
fastened in various ways. (Gluing, screwing, riveting, nailing, see accessories).
The principle
As Uno sheet metal is made of stainless steel, rotting is almost impossible.
almost impossible. This guarantees a long service life and gives you
a visually attractive, clean appearance.
Uno sheet metal is easily recognisable by pigeons, making injuries unlikely.
unlikely. Uno sheet metal can be easily cut to the required
to the desired size.
Uno sheet metal is ideal for mounting on snow guards and very narrow surfaces.
very narrow surfaces.
The advantages
Uno sheet metal is our ‘narrowest version’ (‘wide’ version see - Duo sheet metal)
It is ideally suited for installation on window sills, balcony parapets
balcony parapets, wall projections, railings or similar, wherever only areas of smaller
areas of a smaller width are to be covered.
Uno sheet metal provides your property with optimum protection for narrow areas.
Installation
Uno sheeting can be installed in one or more rows (over the entire surface), or combined with Duo
sheet or Quattro sheet. With full-surface mounting, the
‘flying behind’ is prevented and it is impossible for the pigeons to perch.
Uno sheet metal can be attached either with screws or rivets via the holes provided in the
holes provided in the moulding or simply with our special adhesive
Login