Duo sheet metal 2 row pigeon defence bar made of stainless steel, material no. 1.4301 Wire thickness 2.0 mm Welded onto a 20 mm wide stainless steel strip Length: 1000 mm Spike height 110 mm Made in Germany! Factory / acceptance test certificate according to DIN EN 10204/3.1 possible. The product Duo sheet metal is made of stainless steel, material no. 1.4301. The surface is untreated and the V-shaped spikes (spikes d= 2.0 mm) are welded onto a stainless steel strip every 50 mm. The strip is 20 mm wide and perforated 10 times for mounting purposes. The clear width of the spikes from tip to tip is 65 mm. The spike height is 110 mm. The entire strip is 1000 mm long. Duo sheet metal covers a landing area of approx. 115 mm. The principle As Duo Blech is made of stainless steel, rotting is almost impossible. This guarantees a long service life and gives you a visually attractive, clean appearance. Duo sheet metal can be easily cut to the required size using tin snips. The advantages Duo Sheet is our ‘narrow’ version (‘wide’ version see Quattro Sheet). It is ideally suited for installation on window sills, balcony parapets, wall projections, railings or similar, wherever only areas of small width need to be covered. Duo Sheet gives your property optimum protection. The installation Duo sheet metal can be fitted in one or more rows (over the entire surface) or combined with Quattro sheet metal. When mounted over the entire surface, ‘flying behind’ is prevented and it is impossible for the pigeons to perch. Duo sheet metal can be attached either with screws or rivets via the holes provided in the strip or simply with our special adhesive.  

Duo Transparent Stainless spring steel wire Wire thickness 1.3 mm applied to transparent and UV-stabilised polycarbonate strip Length 500 mm Spike height 110 mm The product Transparent Duo consists of vertical spikes mounted on an evenly evenly curved, transparent polycarbonate strip. are attached. The spikes form equilateral triangles with a side length of 50 mm. The spikes are made of stainless spring steel wire, 110 mm high and 1.3 mm thick. The length of the elements is 500 mm. Transparent Duo covers a landing area of approx. 100 mm. The advantages Transparent Duo consists of a UV-resistant plastic strip made of polycarbonate, is completely weather-resistant, transparent and therefore almost indistinguishable from the surface. The straight shape of the spikes is permanently retained as they are made of hard spring steel wire with high rigidity. Thanks to its filigree design, Transparent Duo is visually very unobtrusive and the impression of the building or façade remains undisturbed. Tools for cutting to the desired format are not necessary, as predetermined breaking points 25 mm predetermined breaking points have been created; a simple bend is sufficient for cutting. Transparent Duo is easy and durable to install using a suitable adhesive. The principle As Transparent Duo is made from stainless spring steel wire and UV-resistant polycarbonate, rotting is almost impossible. This guarantees a long service life and gives you a visually attractive, clean beautiful, clean picture. Transparent Duo is easily recognisable for pigeons, so injuries are unlikely. Installation Transparent Duo is quick and easy to install: Apply our special adhesive from Otto Chemie to the clean and dry surface from Otto Chemie to the clean and dry surface and press the Transparent Duo moulding firmly into place. Transparent Duo can be applied in one or more rows (over the entire surface) or combined be combined with Transparent Quattro. With full-surface mounting the pigeons are prevented from flying behind and perching is impossible

Pigeon defence bar made of stainless steel 1.4301 Spikes diameter 1.8 mm welded on stainless steel bar 1.0 x 20 x 1000 mm Spike length a = 140 mm Spike length b = 105 mm The distance from spike to spike is 50 mm

made of stainless steel 1.4301 Spikes diameter 1.6 mm Welded on stainless steel bar 1.0 x 20 x 1000 mm Spike length a = 140 mm Spike length b = 105 mm The distance from spike to spike is 13 mm

4 row pigeon defence bar made of stainless steel, material no. 1.4301 Wire thickness 2.0 mm Welded onto a 20 mm wide stainless steel strip Length: 1000 mm Spike height 110 mm Made in Germany! Factory / acceptance test certificate according to DIN EN 10204/3.1 possible. The product Quattro sheet metal is made of stainless steel, material no. 1.4301. The surface is untreated. In contrast to our Duo sheet, the V-shaped spikes (spikes d= 2.0 mm) are welded onto a stainless steel strip every 25 mm. The strip is 20 mm wide and perforated 10 times for mounting purposes. The clear width of the spikes from tip to tip is alternately 55 mm and 150 mm. The entire strip is 1000 mm long. Quattro sheet metal covers a landing area of approx. 200 mm. The principle As Quattro sheet metal is made of stainless steel, rotting is almost impossible. This guarantees a long service life and gives you a visually attractive, clean appearance. Quattro sheet metal can be easily cut to the required size using sheet metal shears. The advantages Quattro sheet metal is our ‘wide’ version (‘narrow’ version see ‘Duo sheet metal’). It therefore covers a larger area to be protected, which means less work during installation. Quattro sheet metal can also be perfectly combined with Duo sheet metal. The small spike spacing (25 mm instead of 50 mm) of Quattro sheet gives your object even better protection. The variant In contrast to Quattro sheet metal, Quattro wire has two wires to support the spikes instead of the stainless steel strip. When using Quattro wire, we recommend screwing it in place with our fixing sheets. With Quattro sheet metal, on the other hand, we recommend using our special adhesive for installation due to the larger surface area. However, screwing or riveting is equally possible. Assembly Quattro sheet metal can be fitted in one or more rows (over the entire surface) or combined with Duo sheet metal. When installed over the entire surface, ‘flying behind’ is prevented and it is impossible for pigeons to perch. Quattro sheet metal can be attached either with screws or rivets via the holes provided in the strip or simply with our special adhesive.

4 row pigeon defence bar made of stainless steel 1.4301 Wire thickness 1.6 mm Spikes welded on sheet metal strip 18 x 1000 mm Spike length 105 mm The product Quattro Solar is made of stainless steel, material no. 1.4301. The forward curved V-shaped spikes (spikes ø 1.6 mm) are welded every 25 mm are welded onto an 18 mm wide stainless steel strip. On the bar are provided with 10 holes ø 4 mm for fastening. The The clear width of the spikes from tip to tip is alternately 60 or 70 mm. The spike length is 105 mm. The principle As Quattro Solar is made of stainless steel, rotting is almost impossible. almost impossible. This guarantees a long service life, and you get a visually attractive, clean image. Quattro Solar can be easily cut to the required size using tin snips. Installation Quattro Solar is screwed or glued directly to the photovoltaic System.  

Quattro transparent Stainless spring steel wire d = 1.3 mm wire thickness 1.3 applied to transparent and UV-stabilised polycarbonate strip Length 500 mm Spike length a = 85 mm Spike length b = 120 mm The product Transparent Quattro consists of V-shaped spikes mounted on an evenly evenly curved, transparent and UV-stabilised polycarbonate plastic strip. stabilised plastic strip made of polycarbonate. The spikes are positioned every 25 mm at an angle of 45° to each other. The spikes are made of stainless spring steel wire, material no. 1.4301, 85 mm and 120 mm long and 1.3 mm thick. The length of the elements is 500 mm. Transparent Quattro covers a landing area of approx. 200 mm. The advantages Transparent Quattro consists of a UV-resistant plastic strip made of polycarbonate, is absolutely weather-resistant, transparent and therefore almost indistinguishable from the surface. The straight shape of the spikes is permanently retained as they are made of hard spring steel wire with high rigidity. Due to its filigree construction, Transparent Quattro is visually very unobtrusive and the impression of the building or façade remains undisturbed. Tools for cutting to the desired format are not necessary, as predetermined breaking points 25 mm predetermined breaking points have been created; a simple bend is sufficient for cutting. Transparent Quattro is easy and durable to install using our adhesive. The principle As Transparent Quattro is made from stainless spring steel wire and UV-resistant polycarbonate, rotting is almost impossible. This guarantees a long service life and gives you a visually attractive, clean beautiful, clean image. Transparent Quattro is easily recognisable for pigeons, so injuries are unlikely. Installation Transparent Quattro is quick and easy to install: Apply our special adhesive from Otto Chemie to the clean and dry surface from Otto Chemie to the clean and dry surface and press the Transparent Duo moulding firmly into place. Transparent Quattro can be applied in one or more rows (over the entire surface) or combined be combined with Transparent Quattro. With full-surface installation the pigeons are prevented from flying behind and it is impossible for them to perch.

1 row pigeon defence strip made of stainless steel 1.4301 Wire thickness 2.0 mm Welded on stainless steel strip 20 x 1000 mm Spike height 110 mm Made in Germany! Factory / acceptance test certificate according to DIN EN 10204/3.1 possible The product With Uno sheet metal, the spikes are welded to a 1 m long stainless steel strip, material no. 1.4301 are welded on. The surface is untreated. The stainless steel strip is 20 mm wide, onto which the spikes (d= 2.0 mm) are are welded on at 50 mm intervals and cover a landing area of approx. a width of approx. 50 mm. Holes punched into the ‘’stainless steel strip allow the strip to be variably fastened in various ways. (Gluing, screwing, riveting, nailing, see accessories). The principle As Uno sheet metal is made of stainless steel, rotting is almost impossible. almost impossible. This guarantees a long service life and gives you a visually attractive, clean appearance. Uno sheet metal is easily recognisable by pigeons, making injuries unlikely. unlikely. Uno sheet metal can be easily cut to the required to the desired size. Uno sheet metal is ideal for mounting on snow guards and very narrow surfaces. very narrow surfaces. The advantages Uno sheet metal is our ‘narrowest version’ (‘wide’ version see - Duo sheet metal) It is ideally suited for installation on window sills, balcony parapets balcony parapets, wall projections, railings or similar, wherever only areas of smaller areas of a smaller width are to be covered. Uno sheet metal provides your property with optimum protection for narrow areas. Installation Uno sheeting can be installed in one or more rows (over the entire surface), or combined with Duo sheet or Quattro sheet. With full-surface mounting, the ‘flying behind’ is prevented and it is impossible for the pigeons to perch. Uno sheet metal can be attached either with screws or rivets via the holes provided in the holes provided in the moulding or simply with our special adhesive

1-row pigeon defence bar made of stainless steel 1.4301 with adjustable spikes up to 160 mm Wire thickness 2.0 mm Spike spacing: 25 mm Length: 1000 mm The metal strip has approx. 20 slotted holes for mounting

Pigeon defence for solar modules, photovoltaics and solar systems 1 row pigeon defence strip 1000 mm made of stainless steel 1.4301 Distance from tip to tip: 25 mm Spike length: 110 mm (without bar) Spike length + bar: 130 mm Wire thickness 2.0 mm Similar to illustration Made in Germany!